Hardware > Sun x86

USB scanner

(1/1)

ae:
Falls jemand einen USB scanner unter Solaris betrieben moechte:

Sane unterstuezt das in Solaris 10.
Dazu die sourcen saugen und nach dem README.Solaris uebersetzen.
Bei x86 reicht die derzeitige stable aus, bei sparc muss man zur zeit noch das CVS.
Solange der USB scanner dann von sane selber unterstuezt wird sollte er funktionieren:

sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04a9 [Canon], product=0x220d [CanoScan], chip=LM9832/3) at libusb:/dev/usb:4a9.220d/0
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

scanimage -L
device `plustek:libusb:/dev/usb:4a9.220d/0' is a Canon N670U/N676U/LiDE20 USB flatbed scanner

Ambequemst scant man dann mit xscanimage.

Navigation

[0] Themen-Index