Superuser

Autor Thema: Install-/Jumpserver für Solaris 2.4 x86  (Gelesen 13116 mal)

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Install-/Jumpserver für Solaris 2.4 x86
« am: 18. April 2016, 22:53:13 »
Hallo zusammen,

hat schon mal jemand einen Install- respektive Jumpserver für Solaris 2.4 x86 auf einem Post-Release aufgesetzt?

Ich versuche das gerade bei Sun Solaris 10 unter VMware Workstation 7.1.4, scheitere aber schon damit, dass die benötigten Tools wie z.B. setup_install_server die auch in der Doku (Kapitel 3) angegeben sind, überhaupt erst gar nicht auf dem Medium vorzufinden sind.

Ich versuche mal anstelle die Tools der SPARC-Variante zu nutzen, das sind doch bestimmt nur Shell-Skripte...

Das fängt ja schon mal wieder gut an  :-\

sonnenblen.de - Das unabhängige Sun User Forum

Install-/Jumpserver für Solaris 2.4 x86
« am: 18. April 2016, 22:53:13 »

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #1 am: 19. April 2016, 01:22:09 »
Mindestens das Skript setup_install_server vom SPARC-Installationsmedium funktioniert.

  • ISO/CD-ROM Solaris 2.4 x86 mounten
  • cd /cdrom/cdrom0 && /usr/sfw/bin/gtar czvf /root/sol24x86.tgz solaris_2_4_x86
  • cd /root && /usr/sfw/bin/gtar xzvf sol24x86.tgz
  • umount ISO/CD-ROM
  • ISO/CD-ROM Solaris 2.4 SPARC einbinden/mount
  • Skripte setup_install_server, add_install_client, rm_install_client nach /root/solaris_2_4_x86/s0/ kopieren
  • umount ISO/CD-ROM

# mkdir -p /export/install
# cd /root/solaris_2_4_x86/s0 && ./setup_install_server /export/install


Fortsetzung folgt ... Gute Nacht.

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #2 am: 19. April 2016, 22:52:41 »
Da ist weit mehr "defekt" als ich dachte. Das ISO Image scheint einzig für eine Installation in einem (virtuellen) CD-ROM konzipiert zu sein. Damit lässt sich der Boot-, Install- ggf Konfigurations-Server nicht ohne viel Vorab-Aufwand, d.h. händische Anpassunge aufsetzen zu lassen.

Hat nicht noch wer ein komplettes ISO-Image von Solaris 2.4 für Intel / x86 ?

Ich hätte schon stutzig werden müssen, als außer das s0-Verzeichnis nichts drauf war,
Die Doku weist für x86 explizit das Verzeichnis "s2" aus, das schon gar nicht enthalten ist.

Zitat
Files                               Description
/cdrom/cdrom0/s0           File path of the mounted SPARC Solaris CD on a Solaris 2.x system.
                                       If more than one CD-ROM drive is attached to the system, the path
                                       may vary. (This mount point is created by Volume Management
                                       software.)
/cdrom/cdrom0/s2           File path of the mounted x86 Solaris CD on a Solaris 2.x system. If
                                       more than one CD-ROM drive is attached to the system, the path
                                       may vary. (This mount point is created by Volume Management
                                       software.)
Quelle: x86: Installing Solaris Software, Seite 19

Ob ich das händisch hinbekomme ist fraglich. Eine Orientierung bietet mir Solaris 2.6 CD-ROM nur bedingt, da sich hier der Aufbau auch noch etwas geändert hat, u.a. /cdrom/cdrom0/s2/Solaris_2.6/Tool
 F***  >:(


EDIT:
Hat nicht noch wer ein komplettes ISO-Image von Solaris 2.4 für Intel / x86 ?
Anfrage zurück! Mein Fehler!
Das ISO scheint den s2-Teil doch zu haben also komplett zu sein, wenn man das ISO nicht unter VMware dem Solaris 10 direkt übergibt und von vold automatisch einhängen lässt. Mein Ubuntu 10.04 kann jetzt dafür den s2-Teil mounten, der mir gefehlt hat und verwehrt mir den s0-Teil. Schon verwirrend. :o
Ursache noch unklar.

sx@inovo:/media/cdrom$ ls -l
insgesamt 92
-rwxr-xr-x   1 root bin    42942 1994-07-22 04:01 add_install_client
drwxr-xr-x   2 root daemon  2048 1994-08-03 18:40 archinfo
drwxr-xr-x   3 bin  bin     2048 1994-08-03 18:13 auto_install_sample
-rw-r--r--   1 root daemon  6999 1994-08-03 18:41 Copyright
drwxr-xr-x   3 root daemon  2048 1994-08-03 18:10 export
drwxr-xr-x  14 root bin     2048 1994-10-18 11:30 Patches
drwxr-xr-x   4 root bin     2048 1994-08-03 18:42 Posix.2
-rwxr-xr-x   1 root bin    12298 1994-07-22 04:01 rm_install_client
-rwxr-xr-x   1 root bin     6381 1994-07-22 04:01 setup_install_server
drwxr-xr-x 108 root daemon 14336 1994-08-03 18:41 Solaris_2.4

Dann suche ich jetzt mal einen Weg die zwei Teile so zu vereinen, dass die CD komplett (s0 und s2 Anteil) eingehängt wird, und wenn ich mir eine neue 2.4 CD mit mkisofs erstellen muss, egal...
« Letzte Änderung: 20. April 2016, 00:38:48 von escimo »

Offline vab

  • Global Moderator
  • Sobl Guru
  • *****
  • Beiträge: 513
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #3 am: 09. Mai 2016, 22:51:46 »
Hmmm...

Zitat
1. Die Installation von Solaris 2.4 x86 über Netzwerk ist immer bedienerlos (unattanded / Jumpserver)?

Nein, das sollte genau wie alle anderen Solaris 2.x-Installationen nur "bedienerlos" gehen, wenn er auch die Custom-Jumpstart-Daten findet, sonst wird er interaktiv.

Zitat
2.Ein Zugriff auf die CD über Netzwerk beim Boot des PC i86pc ist wohl nicht möglich für eine interaktive Installation?

Die Frage verstehe ich nicht.  Die CD (bzw. deren Image) wird ja bei der Installation gemountet und ist somit über das Netzwerk verfügbar.  Das muß sie auch immer sein, sonst funktioniert die ganze Installation ja nicht.

Zum Thema s0/s2:  So sind die CDs halt aufgebaut, und man braucht beides.  Am besten, Du mountest sie auf irgendeinem Solaris-x86-System, und machst ein tar von allem.  Dann legst Du das Install-Image von Hand an die richtige Stelle und erzeugst die Datei und das Symlink von Hand in /tftpboot (oder wo auch immer Dein tftpd es finden will) und machst die DHCP-Einträge von Hand.  Diese ganzen Scripte (setup_install_server und add_install_client undsoweiter) funktionieren nur in der Solaris-Umgebung richtig.  Wenn Du irgendwas anders machen willst, geht es manuell deutlich besser.


Gruß -- Volker
Diese Nachricht enthält ausschließlich meine persönliche private Meinung....

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #4 am: 04. Juli 2016, 22:14:04 »
Hallo Volker.
Danke für die Infos. Was meinst du mit "...machst du die DHCP-Einträge von Hand" ? Beispiel?

Bisweilen komme ich damit nicht weiter.
Ich möchte Solaris 2.4 x86 über Netzwerk installieren, interaktiv.

Den RPL daemon bekomme ich überhaupt nicht an's Laufen: keine Fehlermeldung, kein Prozess rpld, kein Log, nichts.  :o
Und es sind an sich alle Verzeichnisse und Dateien da...
Vom Client bekomme ich immer wieder zu lesen "Still trying to find a RPL server..."

Der Jumpserver bzw. Installserver:
bash-3.00# uname -a
SunOS inovos 5.10 Generic_141445-09 i86pc i386 i86pc

/rplboot
bash-3.00# ls -l /rplboot/
total 356
lrwxrwxrwx   1 root     root          14 Jul  4 19:45 192.168.1.35.glue.com -> ./gluecode.com
lrwxrwxrwx   1 root     root           9 Jul  4 19:45 192.168.1.35.hw.com -> ./smc.com
lrwxrwxrwx   1 root     root          26 Jul  4 19:45 192.168.1.35.inetboot -> inetboot.i86pc.Solaris_2.4
-r-xr-xr-x   1 root     root        7517 Jul  4 19:45 gluecode.com
-rwxr-xr-x   1 root     root      143872 Jul  4 19:45 inetboot.i86pc.Solaris_2.4
-rw-r--r--   1 root     root         621 Jul  4 19:45 rm.192.168.1.35
-r-xr-xr-x   1 root     root       13407 Jul  4 19:45 smc.com

/etc/inet/hosts
bash-3.00# cat /etc/inet/hosts
#
# Internet host table
#
127.0.0.1       localhost       loghost
::1     localhost       loghost
192.168.1.35    scenic  #Siemens Nixdorf Scenic Pro C5
192.168.1.17    inovos  # Added by DHCP

/etc/ethers
bash-3.00# cat /etc/ethers   
#00:A0:24:6C:63:39 scenic
0:a0:24:6c:63:39 scenic

/etc/bootparams
bash-3.00# cat /etc/bootparams
* install_config=inovos:/export/jumpserver
scenic root=inovos:/export/jumpstart/2_4_x86/export/exec/kvm/i386.i86pc.Solaris_2.4     install=inovos:/export/jumpstart/2_4_x86 boottype=:in   numbootfiles=3       bootfile=/rplboot/192.168.1.35.hw.com:45000     bootfile=/rplboot/192.168.1.35.glue.com:35000        bootfile=/rplboot/192.168.1.35.inetboot:8000    bootaddr=35000

/etc/nsswitch.conf (Auszug)
bash-3.00# egrep "^(hosts)|(ethers)|(bootparams)" /etc/nsswitch.conf
hosts: files dns # Added by DHCP
ethers:     files
bootparams: files

NFS-Export
bash-3.00# cat /etc/dfs/dfstab  | grep -v ^#
share -F nfs -o ro,anon=0 /export/jumpstart

bash-3.00# share
-               /export/jumpstart   ro,anon=0   ""

Jumpserver Verzeichnis

bash-3.00# ls -l /export/jumpstart/
total 30
drwxr-xr-x   2 root     root         512 Apr 19 19:00 10_amd64
drwxr-xr-x   2 root     root         512 Apr 19 19:00 10_sparc
drwxr-xr-x   2 root     root         512 Apr 19 19:00 10_x86
drwxr-xr-x   2 root     root         512 Apr 19 19:00 2_4_sparc
drwxr-xr-x   9 root     root         512 Apr 20 19:41 2_4_x86
drwxr-xr-x   2 root     root         512 Apr 19 19:00 2_5_1_sparc
drwxr-xr-x   2 root     root         512 Apr 19 19:00 2_5_1_x86
drwxr-xr-x   2 root     root         512 Apr 19 19:00 2_6_sparc
drwxr-xr-x   4 root     root         512 Apr 19 22:35 2_6_x86
drwxr-xr-x   2 root     root         512 Apr 19 19:00 7_sparc
drwxr-xr-x   2 root     root         512 Apr 19 19:00 7_x86
drwxr-xr-x   2 root     root         512 Apr 19 19:00 8_sparc
drwxr-xr-x   2 root     root         512 Apr 19 19:00 8_x86

bash-3.00# ls -l /export/jumpstart/2_4_x86/
total 154
-rw-r--r--   1 root     other       6999 Aug  3  1994 Copyright
drwxr-xr-x  14 root     bin          512 Oct 18  1994 Patches
drwxr-xr-x   4 root     bin          512 Aug  3  1994 Posix.2
drwxr-xr-x 108 root     other       2560 Aug  3  1994 Solaris_2.4
-rwxr-xr-x   1 root     bin        42942 Jul 22  1994 add_install_client
drwxr-xr-x   2 root     other        512 Aug  3  1994 archinfo
drwxr-xr-x   3 bin      bin          512 Aug  3  1994 auto_install_sample
drwxr-xr-x   3 root     other        512 Aug  3  1994 export
-rwxr-xr-x   1 root     bin        12298 Jul 22  1994 rm_install_client
-rwxr-xr-x   1 root     bin         6381 Jul 22  1994 setup_install_server

RPLD Konfiguration
bash-3.00# cat /etc/rpld.conf
#
# Default configuration file for RPL server rpld
#
# Debug Level (0-9)
# 0 = nil
# 9 = most
DebugLevel = 0

# Debug Destination
# 0 = console
# 1 = syslogd
# 2 = log file
DebugDest = 2

# Maximum simultaneous boot request clients
MaxClients = -1

# Background mode
# 0 = not run in background
# 1 = run in background
BackGround = 1

# Frame size to use
FrameSize = 1500

# Log file name
LogFile = /var/spool/rpld.log

# Start Delay Count
StartDelay = 20

# Delay Granularity
DelayGran = 2

end
Start über...
bash-3.00# /usr/sbin/rpld e1000g0
bash-3.00# echo $?
0

bash-3.00# pkginfo | grep SUNWbs
system      SUNWbsr                          Boot Server daemons (Root)
system      SUNWbsu                          Boot Server daemons (Usr)

bash-3.00# svcs -a | egrep "(nfs\/server)|(tftp)|(rarp)|(bootparam)"
online         19:21:02 svc:/network/rpc/bootparams:default
online         19:21:08 svc:/network/nfs/server:default
online         19:21:08 svc:/network/rarp:default
online         20:11:16 svc:/network/tftp/udp6:default

bash-3.00# ps -ef | grep -i bootparam | grep -v grep
    root   357     1   0 19:21:02 ?           0:00 /usr/sbin/rpc.bootparamd
bash-3.00# ps -ef | grep -i rarp | grep -v grep
    root   565     1   0 19:21:09 ?           0:00 /usr/sbin/in.rarpd -a
    root  1255     1   0 19:24:46 ?           0:00 /usr/sbin/in.rarpd -a
Was hat der TFTP damit zu tun? Dachte das ist für SPARC und er RPLD für x86? Ggf. kann Solaris 2.4 nicht TFTP?
Test tftp von anderem Host im selben Netz funktional (aber bedeutungslos?)

Ideen?
« Letzte Änderung: 04. Juli 2016, 22:19:24 von escimo »

Offline vab

  • Global Moderator
  • Sobl Guru
  • *****
  • Beiträge: 513
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #5 am: 05. Juli 2016, 09:00:39 »
Ach Herrje, RPL...

Hast Du es mal mit rpld -a versucht?
Eventuell mußt Du dem mal mit truss oder dtrace zuschauen, was er beim Start treibt.

Das inetboot.i86pc.Solaris_2.4 sollte er dann per tftp holen.  Vielleicht läßtDu den tftpd mal mit -d laufen.
Ist aber natürlich der zweite Schritt, erst muß der Client mal seine Netz-Konfig haben.


Gruß -- Volker
Diese Nachricht enthält ausschließlich meine persönliche private Meinung....

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #6 am: 05. Juli 2016, 09:47:17 »
Mein EDIT-Eintrag habe ich wohl vergesssen zu speichern.
Da waren die Ausgaben von RPLD dabei, warum der nicht will... :-\

Der RPL will mein Netzwerk-Interfacenamen der VM (VMWare Workstation) nicht verwenden (e1000g0)
Wenn ich rpld mit Ausgabe auf Konsole starte, "zerstückelt" RPL mir den NIC-Namen und beschwert sich dann frech, dass er /dev/e1000 - eben nicht e1000g0 - nicht findet.
Ich ergänze den Output heute abend nochmal.

EDIT

lprd kommt wohl nicht mit 64-Bit Libs zurecht?


Zitat
bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
e1000g0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
        inet 192.168.1.17 netmask ffffff00 broadcast 192.168.1.255
        ether 0:c:29:b8:3a:4b

bash-3.00# ls -l /dev/e1000*
lrwxrwxrwx   1 root     root          32 Dec  1  2009 /dev/e1000g -> ../devices/pseudo/clone@0:e1000g
lrwxrwxrwx   1 root     root          55 Dec  1  2009 /dev/e1000g0 -> ../devices/pci@0,0/pci15ad,790@11/pci15ad,750@1:e1000g0

bash-3.00# /usr/sbin/rpld -a -b 0 -d 9 -D 0
found interface = /dev/e1000
ConfigFile = /etc/rpld.conf
DebugLevel = 9
DebugDest  = console
MaxClients = -1 (unlimited)
BackGround = FALSE
LogFile    = /var/spool/rpld.log
StartDelay = 20
DelayGran  = 2
FrameSize  = 1500
Interface  = /dev/e1000
Opening /dev/e
Cannot open device /dev/e

LPRD ist (nur) ein 32-Bit Binary

bash-3.00# file /usr/sbin/rpld
/usr/sbin/rpld: ELF 32-bit LSB executable 80386 Version 1, dynamically linked, stripped

bash-3.00# ldd /usr/sbin/rpld
        libsocket.so.1 =>        /lib/libsocket.so.1
        libc.so.1 =>     /lib/libc.so.1
        libnsl.so.1 =>   /lib/libnsl.so.1
        libmp.so.2 =>    /lib/libmp.so.2
        libmd.so.1 =>    /lib/libmd.so.1
        libscf.so.1 =>   /lib/libscf.so.1
        libdoor.so.1 =>  /lib/libdoor.so.1
        libuutil.so.1 =>         /lib/libuutil.so.1
        libgen.so.1 =>   /lib/libgen.so.1
        libm.so.2 =>     /lib/libm.so.2

bash-3.00# truss /usr/sbin/rpld -a -b 0 -d 9 -D 0
execve("/usr/sbin/rpld", 0x080476A0, 0x080476C4)  argc = 8
mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEFF0000
resolvepath("/usr/lib/ld.so.1", "/lib/ld.so.1", 1023) = 12
resolvepath("/usr/sbin/rpld", "/usr/sbin/rpld", 1023) = 14
sysconfig(_CONFIG_PAGESIZE)                     = 4096
stat64("/usr/sbin/rpld", 0x08047430)            = 0
open("/var/ld/ld.config", O_RDONLY)             Err#2 ENOENT
stat64("/lib/libsocket.so.1", 0x08046CD0)       = 0
resolvepath("/lib/libsocket.so.1", "/lib/libsocket.so.1", 1023) = 19
open("/lib/libsocket.so.1", O_RDONLY)           = 3
mmap(0x00010000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_ALIGN, 3, 0) = 0xFEFB0000
mmap(0x00010000, 114688, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEF90000
mmap(0xFEF90000, 43986, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEF90000
mmap(0xFEFAB000, 2645, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 45056) = 0xFEFAB000
munmap(0xFEF9B000, 65536)                       = 0
memcntl(0xFEF90000, 12080, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
close(3)                                        = 0
stat64("/lib/libc.so.1", 0x08046CD0)            = 0
resolvepath("/lib/libc.so.1", "/lib/libc.so.1", 1023) = 14
open("/lib/libc.so.1", O_RDONLY)                = 3
mmap(0xFEFB0000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFEFB0000
mmap(0x00010000, 1212416, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEE60000
mmap(0xFEE60000, 1102437, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEE60000
mmap(0xFEF7E000, 30183, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 1105920) = 0xFEF7E000
mmap(0xFEF86000, 4240, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEF86000
munmap(0xFEF6E000, 65536)                       = 0
memcntl(0xFEE60000, 124080, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
close(3)                                        = 0
stat64("/lib/libnsl.so.1", 0x08046CD0)          = 0
resolvepath("/lib/libnsl.so.1", "/lib/libnsl.so.1", 1023) = 16
open("/lib/libnsl.so.1", O_RDONLY)              = 3
mmap(0xFEFB0000, 32768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFEFB0000
mmap(0x00010000, 647168, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEDC0000
mmap(0xFEDC0000, 525537, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_TEXT, 3, 0) = 0xFEDC0000
mmap(0xFEE51000, 19877, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_INITDATA, 3, 528384) = 0xFEE51000
mmap(0xFEE56000, 30040, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFEE56000
munmap(0xFEE41000, 65536)                       = 0
memcntl(0xFEDC0000, 57900, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
close(3)                                        = 0
mmap(0x00000000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFEFC0000
mmap(0x00010000, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFEFA0000
munmap(0xFEFB0000, 32768)                       = 0
getcontext(0x080472A0)
getrlimit(RLIMIT_STACK, 0x08047298)             = 0
getpid()                                        = 1254 [1253]
lwp_private(0, 1, 0xFEFA2A00)                   = 0x000001C3
setustack(0xFEFA2A60)
sigfillset(0xFEF85DD0)                          = 0
sysi86(SI86FPSTART, 0xFEF86740, 0x0000133F, 0x00001F80) = 0x00000001
sysconfig(_CONFIG_PAGESIZE)                     = 4096
open("/etc/rpld.conf", O_RDONLY)                = 3
fstat64(3, 0x08046890)                          = 0
brk(0x0806A270)                                 = 0
brk(0x0806E270)                                 = 0
fstat64(3, 0x080467D0)                          = 0
ioctl(3, TCGETA, 0x08046864)                    Err#25 ENOTTY
read(3, " #\n #   D e f a u l t  ".., 8192)     = 496
llseek(3, 0, SEEK_CUR)                          = 496
close(3)                                        = 0
open("/dev/ip", O_RDONLY)                       = 3
ioctl(3, SIOCGIFNUM, 0x0804760C)                = 0
ioctl(3, SIOCGIFCONF, 0x08046DF8)               = 0
ioctl(3, SIOCGIFFLAGS, 0x0806A278)              = 0
ioctl(3, SIOCGIFFLAGS, 0x0806A298)              = 0
ioctl(1, TCGETA, 0x08046134)                    = 0
fstat64(1, 0x080460A0)                          = 0
found interface = /dev/e1000
write(1, " f o u n d   i n t e r f".., 29)      = 29
open("/dev/e", O_RDWR)                          Err#2 ENOENT
close(3)                                        = 0
ConfigFile = /etc/rpld.conf
write(1, " C o n f i g F i l e   =".., 28)      = 28
DebugLevel = 9
write(1, " D e b u g L e v e l   =".., 15)      = 15
DebugDest  = console
write(1, " D e b u g D e s t     =".., 21)      = 21
MaxClients = -1 (unlimited)
write(1, " M a x C l i e n t s   =".., 28)      = 28
BackGround = FALSE
write(1, " B a c k G r o u n d   =".., 19)      = 19
LogFile    = /var/spool/rpld.log
write(1, " L o g F i l e         =".., 33)      = 33
StartDelay = 20
write(1, " S t a r t D e l a y   =".., 16)      = 16
DelayGran  = 2
write(1, " D e l a y G r a n     =".., 15)      = 15
FrameSize  = 1500
write(1, " F r a m e S i z e     =".., 18)      = 18
Interface  = /dev/e1000
write(1, " I n t e r f a c e     =".., 24)      = 24
Opening /dev/e
write(1, " O p e n i n g   / d e v".., 15)      = 15
open("/dev/e", O_RDWR)                          Err#2 ENOENT
Cannot open device /dev/e
write(1, " C a n n o t   o p e n  ".., 26)      = 26
_exit(-1)
« Letzte Änderung: 05. Juli 2016, 21:40:15 von escimo »

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #7 am: 18. Juli 2016, 17:47:50 »
Mmm. Habe nochmal auf Null zurückgesetzt.

VM-Guest Solaris 10 32-Bit unter VirtualBox mit PCnet-PCI II (pcn0) als Netzwerkbrücke konfiguriert, Solaris 10 core + Anpassungen (ohne X11) installiert. SSHD konfiguriert. Alles schick.

# pkginfo | grep SUNWbs
system      SUNWbsr                      Boot Server daemons (Root)
system      SUNWbsu                      Boot Server daemons (Usr)

# pkginfo | grep SUNWtf
system      SUNWtftp                     Trivial File Transfer Server
system      SUNWtftpr                    Trivial File Transfer Server (Root)

# pkginfo | grep SUNWnfs
system      SUNWnfsckr                   Network File System (NFS) client kernel support (Root)
system      SUNWnfscr                    Network File System (NFS) client support (Root)
system      SUNWnfscu                    Network File System (NFS) client support (Usr)
system      SUNWnfsskr                   Network File System (NFS) server kernel support (Root)
system      SUNWnfssr                    Network File System (NFS) server support (Root)
system      SUNWnfssu                    Network File System (NFS) server support (Usr)

Dann...

1. Volume Manager SMF Service deaktiviert

# svcs -a | grep vol
disabled       15:09:11 svc:/system/filesystem/volfs:default

EDIT BEGIN
2. CD-Image mounten lofiadm
/!\ Das geht irgendwie nach wie vor nicht. Daher bediene ich mich aus einem selbsterstellten TGZ der Slices 0+2, welches ich nach dem Mount unter Ubuntu mittels FTP auf der Solaris 10 VM abgelegt und entpackt habe

# lofiadm -a /home/sx/solaris.2.4.x86.iso
dev/lofi/1
# mount -o ro -F hsfs /dev/lofi/1 /mnt
# cd /mnt
# ls -l
total 184
-rwxr-xr-x   1 root     bin        42942 Jul 22  1994 add_install_client
drwxr-xr-x   2 root     other       2048 Aug  3  1994 archinfo
drwxr-xr-x   3 bin      bin         2048 Aug  3  1994 auto_install_sample
-rw-r--r--   1 root     other       6999 Aug  3  1994 Copyright
drwxr-xr-x   3 root     other       2048 Aug  3  1994 export
drwxr-xr-x  14 root     bin         2048 Okt 18  1994 Patches
drwxr-xr-x   4 root     bin         2048 Aug  3  1994 Posix.2
-rwxr-xr-x   1 root     bin        12298 Jul 22  1994 rm_install_client
-rwxr-xr-x   1 root     bin         6381 Jul 22  1994 setup_install_server
drwxr-xr-x 108 root     other      14336 Aug  3  1994 Solaris_2.4
EDIT END

3. Anlage Jumpstart Verzeichnisstruktur
(i) Verzeichnisnamen "jumpstart" habe ich zugunsten "install" ersetzt

# mkdir -p /export/install/{2_4,2_4_x86}
# ./setup_install_server /export/install/2_4_x86
Verifying target directory...
Copying the CD image to disk...
Install Server setup complete

4. Konfiguration Install-Client erzeugen
(i) Bootserver nicht nötig, da Installserver später im selben Subnetz laufen wird wie Install-Client

# egrep "^(hosts)|(ethers)|(bootparams)" /etc/nsswitch.conf
hosts: files dns # Added by DHCP
ethers:     files
bootparams: files

# grep scenic /etc/inet/hosts
192.168.1.35    scenic  # Siemens Nixdorf Scenic Pro C5

# cat /etc/ethers
#00:A0:24:6C:63:39 scenic
0:a0:24:6c:63:39 scenic

# pwd
/export/install/2_4_x86

# ./add_install_client -s jumper:/export/install scenic i86pc
Warning: no interface configured for subnet 192.168.1.0
making /rplboot
saving original /etc/dfs/dfstab in /etc/dfs/dfstab.orig
Adding "share -F nfs -o ro,anon=0 /export/install" to /etc/dfs/dfstab
starting rpld
starting rarpd
starting bootparamd
updating /etc/bootparams
copying inetboot to /rplboot

# cat /etc/bootparams
scenic root=jumper:/export/install/2_4_x86/export/exec/kvm/i386.i86pc.Solaris_2.4       install=jumper:/export/install boottype=:in   numbootfiles=3    bootfile=/rplboot/192.168.1.35.hw.com:45000     bootfile=/rplboot/192.168.1.35.glue.com:35000   bootfile=/rplboot/192.168.1.35.inetboot:8000    bootaddr=35000


5. NFS-Server konfigurieren (Export-Verzeichnis)
(i) Refresh nach Anpassung alternativ über "svcadm refresh network/nfs/server"
# grep ^share /etc/dfs/dfstab
share -F nfs -o ro,anon=0 /export/install

# shareall


6. TFTP Server konfiguriert
(i) ist eigentlich nicht nötig aber der Vollständigkeit auf RPL-Rootverzeichnis gelegt
# tail -2 /etc/inetd.conf
#tftp   dgram   udp6    wait    root    /usr/sbin/in.tftpd      in.tftpd -s /tftpboot
tftp    dgram   udp6    wait    root    /usr/sbin/in.tftpd      in.tftpd -s /rplboot

# inetconv -i /etc/inetd.conf
inetconv: Notice: Service manifest for 100235/1 already generated as /var/svc/manifest/network/rpc/100235_1-rpc_ticotsord.xml, skipped
tftp -> /var/svc/manifest/network/tftp-udp6.xml
Importing tftp-udp6.xml ...Done

# svcs -a | grep -i tftp
online          8:20:39 svc:/network/tftp/udp6:default

7. Services und Daemon(s) starten
# svcs -a | egrep "(nfs\/server)|(tftp)|(rarp)|(bootparam)"
disabled       12:41:39 svc:/network/rpc/bootparams:default
disabled       12:41:39 svc:/network/rarp:default
online         14:31:01 svc:/network/nfs/server:default
online         14:38:54 svc:/network/tftp/udp6:default

# svcadm enable network/rpc/bootparams
# svcadm enable network/rarp

# svcs -a | egrep "(nfs\/server)|(tftp)|(rarp)|(bootparam)"
online         14:31:01 svc:/network/nfs/server:default
online         14:38:54 svc:/network/tftp/udp6:default
online         15:05:20 svc:/network/rpc/bootparams:default
online         15:05:27 svc:/network/rarp:default

# /usr/sbin/rpld -a
# echo $?
0

# reboot
<VM_REBOOT>

# ps -ef | egrep -i "(bootparam)|(rarpd)|(rpld)" | grep -v grep
    root   274     1   0 15:09:18 ?           0:00 /usr/sbin/rpc.bootparamd
    root   448     1   0 15:09:22 ?           0:00 /usr/sbin/in.rarpd -a
    root   482     1   0 15:09:22 ?           0:00 /usr/sbin/rpld -a

# svcs -a | egrep "(nfs\/server)|(tftp)|(rarp)|(bootparam)"
online         15:09:18 svc:/network/rpc/bootparams:default
online         15:09:20 svc:/network/tftp/udp6:default
online         15:09:21 svc:/network/nfs/server:default
online         15:09:21 svc:/network/rarp:default


# grep ^share /etc/dfs/dfstab
share -F nfs -o ro,anon=0 /export/install
# share
-               /export/install   ro,anon=0   ""
« Letzte Änderung: 19. Juli 2016, 16:24:43 von escimo »

Offline vab

  • Global Moderator
  • Sobl Guru
  • *****
  • Beiträge: 513
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #8 am: 18. Juli 2016, 21:10:20 »
Das sieht ja schon ganz nett aus.  Funktioniert es nun? :-)

Zwei Anmerkungen:

  • Das Kopieren von einer Slice herunter funktioniert so einfach nicht.  Dazu muß man entweder eine "echte" CD mounten, oder jede Slice einzeln von der CD herunterkopieren und einzeln mounten.  Dazu hab ich 2003(!) mal ein Tool geschrieben, das die Slices in Files schreibt, die dann per lofi gemountet werden können.
  • Das von Dir rot markierte im Output von rpld scheint einfach ein Bug zu sein.  Das Programm verkraftet nicht, daß schon der Treibername "e1000g" Ziffern enthält.  Wenn Deine Karte "hme0" heißen würde, hätte es vermutlich geklappt.

Gruß -- Volker
Diese Nachricht enthält ausschließlich meine persönliche private Meinung....

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #9 am: 18. Juli 2016, 23:09:50 »
Hi Volker,

EDIT BEGIN
danke für deine Anmerkungen.
der Inhalt hat zumindest eine identische Größe. Vergleich der Datenmenge nach Ausführung von setup_install_server
bash-3.2# du -sh 2_4_x86 2_4_x86.backup
 231M   2_4_x86                ---> lofiadm ISO Mount
 231M   2_4_x86.backup    ---> Entpacken aus TGZ
EDIT END

Ob es funktioniert? - Ein ganz klares NEIN.
Ich konnte zumindest in die interaktive Installation einsteigen. Weit gekommen bin ich damit nicht. Der hängt bei der Konfiguration der Devices bzw. beim Laden von Treibern ...

Zitat
Boot path: /isa/elx@0,0
Boot args: /kernel/unix

Select the type of installation you want to perform:
(...)
<<< starting interactive installation >>>

Booting /kernel/unix...
SunOS Release 5.4 Vesion generic [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1994, Sun Microsystems, Inc.
whoami: no domain name
/


Habe noch keine Idee warum. Gebootet habe ich mit dem Driver Update 10 (DU10) Boot-Disks. Ggf. ist beim Kopieren der S2-Slice unter Linux auch was schiefgegangen. In der VM konnte ich das bis jetzt noch nicht beheben/umgehen.

Auszug /var/spool/rpld.log ab RPL von Install-Client
Zitat
FIND frame received
host is scenic
Entered clientlookup(), number of clients = 0
No clients yet, returning
There are 3 bootfiles for this client
Sending out FOUND Frame
SEND FILE REQUEST received
Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
SEND FILE REQUEST received
Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
SEND FILE REQUEST received
Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
reading file /rplboot/192.168.1.35.hw.com, seeking to 0
SEND FILE REQUEST received
Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
SEND FILE REQUEST received

(...)

Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
reading file /rplboot/192.168.1.35.glue.com, seeking to 0
SEND FILE REQUEST received

(...)

Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
reading file /rplboot/192.168.1.35.inetboot, seeking to 136785
SEND FILE REQUEST received

(...)

SEND FILE REQUEST received
Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
reading file /rplboot/192.168.1.35.inetboot, seeking to 142657
Current file reaches eof, closing
All files downloaded, update state to ST_SEND_FINAL
SEND FILE REQUEST received
Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
Invalid status 1 when SEND FILE comes in
sending down the last frame
removing client 0 A0 24 6C 63 3

« Letzte Änderung: 19. Juli 2016, 15:18:22 von escimo »

sonnenblen.de - Das unabhängige Sun User Forum

Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #9 am: 18. Juli 2016, 23:09:50 »

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #10 am: 19. Juli 2016, 14:36:31 »
Ich konnte zumindest in die interaktive Installation einsteigen. Weit gekommen bin ich damit nicht. Der hängt bei der Konfiguration der Devices bzw. beim Laden von Treibern ...
(...)
Habe noch keine Idee warum. Gebootet habe ich mit dem Driver Update 10 (DU10) Boot-Disks. Ggf. ist beim Kopieren der S2-Slice unter Linux auch was schiefgegangen. (...)
Habe wohl beim add_install_client was falsch gemacht...
Zitat
# cat /etc/bootparams
scenic root=jumper:/export/install/2_4_x86/export/exec/kvm/i386.i86pc.Solaris_2.4   install=jumper:/export/install   boottype=:in   (...)
Sollte eigentlich auf /export/install/2_4_x86 verweisen :-\

# rm /etc/ethers /etc/bootparams
# rm -Rf /rplboot
# cd /export/install/2_4_x86 && ./add_install_client -e "0:a0:24:6c:63:39" -s "jumper:/export/install/2_4_x86" scenic i86pc
Warning: no interface configured for subnet 192.168.1.0
Adding Ethernet number for scenic to /etc/ethers
making /rplboot
saving original /etc/dfs/dfstab in /etc/dfs/dfstab.orig
Adding "share -F nfs -o ro,anon=0 /export/install/2_4_x86" to /etc/dfs/dfstab
starting rpld
starting rarpd
starting bootparamd
updating /etc/bootparams
copying inetboot to /rplboot
# share
-               /export/install/2_4_x86   ro,anon=0   ""
# reboot



Derweil habe ich beim Suchen auch noch sowas hier gefunden:
https://community.oracle.com/thread/1912367?start=0&tstart=0

Alternativ könnte man es mal mit Linux probieren:
http://hintshop.ludvig.co.nz/show/solaris-jumpstart-linux-server/

Oder...
https://github.com/snltd/Gentle-Jumpstart
@Volker: meintest du sowas?

Im Moment werde noch ein wenig "forschen" bis ich mich auf Alternativlösungen oder gar dein Einbau eines CD-ROM Laufwerkes stürze.
« Letzte Änderung: 19. Juli 2016, 16:28:22 von escimo »

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #11 am: 19. Juli 2016, 22:12:58 »
Nach der Anpassung mit dem NFS-Share sieht nun das rpld.log "sauberer" aus:
Zitat
# tail -f /var/spool/rpld.log
Sending DL_BIND_REQ to ethernet driver
Need to link LLC under /dev/pcn
Opening /dev/llc1 for SAP FC
Linking /dev/pcn underneath /dev/llc1 FC case
setting PPA to 0
Sending DL_ATTACH_REQ to /dev/llc1 FC
Sending DL_BIND_REQ to /dev/llc1 FC
setting RPL multicast address
Tue Jul 19 19:41:33 2016
Start listening to RPL requests ...
FIND frame received
host is scenic
Entered clientlookup(), number of clients = 0
No clients yet, returning
There are 3 bootfiles for this client
Sending out FOUND Frame
SEND FILE REQUEST received
Entered clientlookup(), number of clients = 1
Looking for client 0 A0 24 6C 63 39
Client found
reading file /rplboot/192.168.1.35.hw.com, seeking to 0
reading file /rplboot/192.168.1.35.hw.com, seeking to 1468
reading file /rplboot/192.168.1.35.hw.com, seeking to 2936
reading file /rplboot/192.168.1.35.hw.com, seeking to 4404
reading file /rplboot/192.168.1.35.hw.com, seeking to 5872
reading file /rplboot/192.168.1.35.hw.com, seeking to 7340
reading file /rplboot/192.168.1.35.hw.com, seeking to 8808
reading file /rplboot/192.168.1.35.hw.com, seeking to 10276
reading file /rplboot/192.168.1.35.hw.com, seeking to 11744
reading file /rplboot/192.168.1.35.hw.com, seeking to 13212
Current file reaches eof, closing
reading file /rplboot/192.168.1.35.glue.com, seeking to 0
reading file /rplboot/192.168.1.35.glue.com, seeking to 1468
reading file /rplboot/192.168.1.35.glue.com, seeking to 2936
reading file /rplboot/192.168.1.35.glue.com, seeking to 4404
reading file /rplboot/192.168.1.35.glue.com, seeking to 5872
reading file /rplboot/192.168.1.35.glue.com, seeking to 7340
Current file reaches eof, closing
reading file /rplboot/192.168.1.35.inetboot, seeking to 0
reading file /rplboot/192.168.1.35.inetboot, seeking to 1468
reading file /rplboot/192.168.1.35.inetboot, seeking to 2936
reading file /rplboot/192.168.1.35.inetboot, seeking to 4404
reading file /rplboot/192.168.1.35.inetboot, seeking to 5872
reading file /rplboot/192.168.1.35.inetboot, seeking to 7340
reading file /rplboot/192.168.1.35.inetboot, seeking to 8808
reading file /rplboot/192.168.1.35.inetboot, seeking to 10276
reading file /rplboot/192.168.1.35.inetboot, seeking to 11744
reading file /rplboot/192.168.1.35.inetboot, seeking to 13212
reading file /rplboot/192.168.1.35.inetboot, seeking to 14680
reading file /rplboot/192.168.1.35.inetboot, seeking to 16148
reading file /rplboot/192.168.1.35.inetboot, seeking to 17616
reading file /rplboot/192.168.1.35.inetboot, seeking to 19084
reading file /rplboot/192.168.1.35.inetboot, seeking to 20552
reading file /rplboot/192.168.1.35.inetboot, seeking to 22020
reading file /rplboot/192.168.1.35.inetboot, seeking to 23488
reading file /rplboot/192.168.1.35.inetboot, seeking to 24956
reading file /rplboot/192.168.1.35.inetboot, seeking to 26424
reading file /rplboot/192.168.1.35.inetboot, seeking to 27892
reading file /rplboot/192.168.1.35.inetboot, seeking to 29360
reading file /rplboot/192.168.1.35.inetboot, seeking to 30828
reading file /rplboot/192.168.1.35.inetboot, seeking to 32296
reading file /rplboot/192.168.1.35.inetboot, seeking to 33764
reading file /rplboot/192.168.1.35.inetboot, seeking to 35232
reading file /rplboot/192.168.1.35.inetboot, seeking to 36700
reading file /rplboot/192.168.1.35.inetboot, seeking to 38168
reading file /rplboot/192.168.1.35.inetboot, seeking to 39636
reading file /rplboot/192.168.1.35.inetboot, seeking to 41104
reading file /rplboot/192.168.1.35.inetboot, seeking to 42572
reading file /rplboot/192.168.1.35.inetboot, seeking to 44040
reading file /rplboot/192.168.1.35.inetboot, seeking to 45508
reading file /rplboot/192.168.1.35.inetboot, seeking to 46976
reading file /rplboot/192.168.1.35.inetboot, seeking to 48444
reading file /rplboot/192.168.1.35.inetboot, seeking to 49912
reading file /rplboot/192.168.1.35.inetboot, seeking to 51380
reading file /rplboot/192.168.1.35.inetboot, seeking to 52848
reading file /rplboot/192.168.1.35.inetboot, seeking to 54316
reading file /rplboot/192.168.1.35.inetboot, seeking to 55784
reading file /rplboot/192.168.1.35.inetboot, seeking to 57252
reading file /rplboot/192.168.1.35.inetboot, seeking to 58720
reading file /rplboot/192.168.1.35.inetboot, seeking to 60188
reading file /rplboot/192.168.1.35.inetboot, seeking to 61656
reading file /rplboot/192.168.1.35.inetboot, seeking to 63124
reading file /rplboot/192.168.1.35.inetboot, seeking to 64592
reading file /rplboot/192.168.1.35.inetboot, seeking to 66060
reading file /rplboot/192.168.1.35.inetboot, seeking to 67528
reading file /rplboot/192.168.1.35.inetboot, seeking to 68996
reading file /rplboot/192.168.1.35.inetboot, seeking to 70464
reading file /rplboot/192.168.1.35.inetboot, seeking to 71932
reading file /rplboot/192.168.1.35.inetboot, seeking to 73400
reading file /rplboot/192.168.1.35.inetboot, seeking to 74868
reading file /rplboot/192.168.1.35.inetboot, seeking to 76336
reading file /rplboot/192.168.1.35.inetboot, seeking to 77804
reading file /rplboot/192.168.1.35.inetboot, seeking to 79272
reading file /rplboot/192.168.1.35.inetboot, seeking to 80740
reading file /rplboot/192.168.1.35.inetboot, seeking to 82208
reading file /rplboot/192.168.1.35.inetboot, seeking to 83676
reading file /rplboot/192.168.1.35.inetboot, seeking to 85144
reading file /rplboot/192.168.1.35.inetboot, seeking to 86612
reading file /rplboot/192.168.1.35.inetboot, seeking to 88080
reading file /rplboot/192.168.1.35.inetboot, seeking to 89548
reading file /rplboot/192.168.1.35.inetboot, seeking to 91016
reading file /rplboot/192.168.1.35.inetboot, seeking to 92484
reading file /rplboot/192.168.1.35.inetboot, seeking to 93952
reading file /rplboot/192.168.1.35.inetboot, seeking to 95420
reading file /rplboot/192.168.1.35.inetboot, seeking to 96888
reading file /rplboot/192.168.1.35.inetboot, seeking to 98356
reading file /rplboot/192.168.1.35.inetboot, seeking to 99824
reading file /rplboot/192.168.1.35.inetboot, seeking to 101292
reading file /rplboot/192.168.1.35.inetboot, seeking to 102760
reading file /rplboot/192.168.1.35.inetboot, seeking to 104228
reading file /rplboot/192.168.1.35.inetboot, seeking to 105696
reading file /rplboot/192.168.1.35.inetboot, seeking to 107164
reading file /rplboot/192.168.1.35.inetboot, seeking to 108632
reading file /rplboot/192.168.1.35.inetboot, seeking to 110100
reading file /rplboot/192.168.1.35.inetboot, seeking to 111568
reading file /rplboot/192.168.1.35.inetboot, seeking to 113036
reading file /rplboot/192.168.1.35.inetboot, seeking to 114504
reading file /rplboot/192.168.1.35.inetboot, seeking to 115972
reading file /rplboot/192.168.1.35.inetboot, seeking to 117440
reading file /rplboot/192.168.1.35.inetboot, seeking to 118908
reading file /rplboot/192.168.1.35.inetboot, seeking to 120376
reading file /rplboot/192.168.1.35.inetboot, seeking to 121844
reading file /rplboot/192.168.1.35.inetboot, seeking to 123312
reading file /rplboot/192.168.1.35.inetboot, seeking to 124780
reading file /rplboot/192.168.1.35.inetboot, seeking to 126248
reading file /rplboot/192.168.1.35.inetboot, seeking to 127716
reading file /rplboot/192.168.1.35.inetboot, seeking to 129184
reading file /rplboot/192.168.1.35.inetboot, seeking to 130652
reading file /rplboot/192.168.1.35.inetboot, seeking to 132120
reading file /rplboot/192.168.1.35.inetboot, seeking to 133588
reading file /rplboot/192.168.1.35.inetboot, seeking to 135056
reading file /rplboot/192.168.1.35.inetboot, seeking to 136524
reading file /rplboot/192.168.1.35.inetboot, seeking to 137992
reading file /rplboot/192.168.1.35.inetboot, seeking to 139460
reading file /rplboot/192.168.1.35.inetboot, seeking to 140928
reading file /rplboot/192.168.1.35.inetboot, seeking to 142396
reading file /rplboot/192.168.1.35.inetboot, seeking to 143864
Current file reaches eof, closing
All files downloaded, update state to ST_SEND_FINAL
sending down the last frame
removing client 0 A0 24 6C 63 39

Es kommen zwar noch Fehlermeldungen der Art...
Zitat
WARNING: forceload of drv/<foo> failed
Configuring the /devices directory
Configuring the /dev directory
...aber nach ca 5 Minuten erscheint die "gewohnte", blaue Anzeige mit der roten Titelleiste "The Solaris Installation Program" sowie der grünen Fußzeile "F2 Continue F6 Help"

Morgen geht es dann weiter, da ich mich erst mal in die folgenden zwei Manuals einlesen muss:
- Solaris 2.4 x86 Driver Update 10 Guide
- Solaris 2.4 x86 Video Driver Update 10 Guide

Patches lässt sich das installierte Image /export/install/2_4_x86 wohl nicht mit dem Recommended Patch Cluster, oder?
Zumindest habe ich dazu nichts im Manual gefunden. Allerdings gibt es ein Verzeichnis "Patches". Wenn ich da das Patch-Cluster ablege...?

Offline vab

  • Global Moderator
  • Sobl Guru
  • *****
  • Beiträge: 513
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #12 am: 20. Juli 2016, 11:44:20 »
Moin!  Schön, daß Du weitergekommen bist.

  • Dieses GentleJumpstart kenne ich nicht. Und mit Linux mußt Du erstmal am Linux basteln. Ich meinte "ganz von Hand", also bootparams editieren, Link in /tftpboot anlegen, usw.
  • Die forceload-Meldungen beim Installieren sind normal und harmlos.
  • Das Install-Image kann man im Prinzip patchen, würde ich aber von abraten.  Lieber "normal" installieren und danach das laufende System patchen.  Nicht alle Scripte in den alten Paketen verkraften das Patchen mit -R.

Gruß -- Volker
Diese Nachricht enthält ausschließlich meine persönliche private Meinung....

Offline escimo

  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #13 am: 23. Juli 2016, 23:26:51 »
Nun konnte ich zwar die Installation anstoßen, aber nicht zum Abschluß bringen.
Grund: das Paket SUNWcsr (Core Solaris - Root) ist anscheinend nicht konsistent.

Infos zum Paket aus der Datei SUNWcsr/pkginfo
Zitat
sx@jumper:~/cdrom/Solaris_2.4 $ cat /export/install/2_4_x86/Solaris_2.4/SUNWcsr/pkginfo
PKG=SUNWcsr
NAME=Core Solaris, (Root)
ARCH=i386
VERSION=11.5.1,REV=94.07.18.19.02
PRODNAME=SunOS
PRODVERS=5.4/fcs_d
SUNW_PKGTYPE=root
MAXINST=1000
CATEGORY=system
DESC=Core Solaris, (Root)
VENDOR=Sun Microsystems, Inc.
HOTLINE=Please contact your local service provider
EMAIL=
CLASSES=none cronroot passwd nametomajor devlinktab tiservices renamenew preserve minorperm inetdconf iuap etcsystem tzonecvt drvalias kclasses etcremote nsswitch netconfig deflogin defsu syslogconf ttysrch group
BASEDIR=/
PSTAMP=predator940719021708
FCS (First Customer Shipment)  :-[

Auszug "Solaris Installation Console"
Zitat
Beginning Solaris package installation...
Solaris 2.4 software package installation part

Solaris 2.4 packages partially installed:
                SUNWcsr

Customizing system files:
        - Local mount points (/etc/vfstab)
cp: cannot access /a/etc/vfstab
ERROR:  Could not create the file system mount
Install failed.  See /tmp/install_log for more
#

Auszug aus dem Installaltionsprotokoll /tmp/install_log
Zitat
Insatllation of <SUNWcsu> was successful.
10422 blocks
pkgadd: ERROR: source path </cdrom/Solaris_2.4/SUNWcsr/reloc/var/spool/cron/crontabs/root> is corrupt
    pathname does not exist
ERROR: attribute verifaction of </a/var/spool/cron/crontabs/root> failed
    pathname does not exist
(...)

Und was jetzt? SUNWcsr patchen? Ich probiere es mal.
Hat ggf noch jemand ein ISO Version aktueller als die FSC?

Offline vab

  • Global Moderator
  • Sobl Guru
  • *****
  • Beiträge: 513
Antw:Install-/Jumpserver für Solaris 2.4 x86
« Antwort #14 am: 24. Juli 2016, 18:50:18 »
Das sieht schlecht aus.  SUNWcsr partially installed -- das kann nicht funktionieren.  Die vfstab-Meldung ist vermutlich ein Folgefehler.

Ist denn auf Deinem Installserver die als "source path" angegebene Datei vorhanden?


Gruß -- Volker
Diese Nachricht enthält ausschließlich meine persönliche private Meinung....