sonnenblen.de - Das unabhängige Sun User Forum
Hardware => Sun SPARC => Thema gestartet von: escimo am 30. Januar 2010, 18:00:53
-
Hallo zusammen,
was mir bei der Blade 100 nicht ganz klar wird:
Da die Blade 1x0 einen NVRAM/TOD mit integrierter Batterie besitzt, für welche Komponente auf der Systemplatine dann noch eine Extra-Batterie (neben der CPU) bereitstellen?
12C IDPROM
SYSTEM HOSTID COMPONENT TYPE PART # SOCKET
Sun Blade 100 8xxxxxxx 48T59 NVRAM f100-6889 U48
Im Service Manual habe ich dazu nichts gefunden. In den FIN's steht dazu leider auch nichts. :(
Bei den neueren SPARC Workstations wurde an Stelle eines NVRAM/TOD mit integrierter Batterie der Einsatz eines SEEPROM (1× MAC) mit angebundender, externer Flachbatterie vorgezogen, um im Falle eines Systemboard-Austausches den IDPROM auf das neue Systemboard übertragen zu können, ohne neue Lizenzen (FLEXlm) beantragen zu müssen.
Hintergrund: Ich überlege noch, ob ich mir nicht noch ein letztes Mal ein SPARC-basiertes System über einen Reseller kaufen sollte.
Grüße,
escimo
-
Im Service Manual habe ich dazu nichts gefunden.
Im Anhang des SM stand dann doch noch etwas:
C.2.7 Flash PROM
The Sun Blade 100 motherboard contains 1 Mbyte of flash memory which is
connected to the EBus of the PCIO-2 ASIC. The flash PROM is an 8 Mbit, 5.0 volt
flash memory with faster than 120ns access time.
The 1 Mbyte of the PROM is divided into two halves, the OpenBoot PROM and the
Power-On Self Test (POST). The OpenBoot PROM and POST image reside in a
separate address space off of the EBus space. There is a ROMBO connector for
OpenBoot PROM and POST software development during initial bringup phase and
two jumpers, one for enabling the use of connector ROMBO, the other for flash
PROM write protect.
(...)
C.2.9 NVRAM/TOD
The system requires at least 8 Kbytes of non-volatile static RAM to store the
variables for the operating system and a real time clock to do timekeeping. This
device has both functions integrated plus the self-contained battery. It also has a
programmable alarm interrupt output which can be used by the software to enable
auto-shutdown (auto suspend/resume) as a power management choice.
Also ist die Batterie für den Flash PROM, das den OBP enthält und der NVRAM enthält aber wie gehabt die Host-ID. Habe ich das richtig verstanden?
-
Dann bleiben als Alternativen ohne NVRAM/TOD-Chip mit integrierter Batterie:
SYSTEM HOSTID COMPONENT TYPE PART # SOCKET
Sun Blade 1000 8xxxxxxx SEEPROM 1× MAC 525-1788 U2101
Sun Blade 2000 83xxxxxx SEEPROM 1× MAC 525-1788 U2101
Sun Blade 1500 (1.0GHz) 83xxxxxx SEEPROM 1× MAC 525-2033 Unknown
Sun Blade 2500 (1.2GHz) 83xxxxxx SEEPROM 1× MAC 525-2024 U47
Sun Blade 1500 (1.5GHz) 83xxxxxx SEEPROM 1× MAC 525-2097 Unknown
Sun Blade 2500 (1.6GHz) 83xxxxxx SEEPROM 1× MAC 525-2139 U47
Sun Ultra 25/45 83xxxxxx SEEPROM 1× MAC 525-? U?
Da wäre eine Blade 1500 eventuell genau richtig.
Oder man bastelt an den alten NVRAM/TOD eine neue, passende Batterie ran. :-\