sonnenblen.de - Das unabhängige Sun User Forum
Hardware => Sun SPARC => Thema gestartet von: linuxdomination am 19. April 2011, 12:53:49
-
hallo,
habe meine veritas testkiste mit liveupgrade von sol8 auf sol10 hochgezogen (ich weis ist nicht supportet...) und nun macht das a5200/luxadm zicken.
SunOS 5.10 Generic_142909-17 sun4u sparc SUNW,Ultra-Enterprise
arrays werden erkannt, aber keine fc disks...
root:/etc/vx> luxadm probe
Found Enclosure(s):
SENA Name:PHOTON-2 Node WWN:50800200000ec1a0
Logical Path:/dev/es/ses0
Logical Path:/dev/es/ses1
Logical Path:/dev/es/ses2
Logical Path:/dev/es/ses3
SENA Name:PHOTON-1 Node WWN:50800200000e8f80
Logical Path:/dev/es/ses4
Logical Path:/dev/es/ses5
Logical Path:/dev/es/ses6
Logical Path:/dev/es/ses7
No FC devices found.
root:/etc/vx> luxadm display PHOTON-1
SENA
No FC devices found. - /devices/sbus@a,0/SUNW,socal@d,10000/sf@0,0/ses@w50800200000e8f81,0:0.
root:/etc/vx> luxadm display PHOTON-2
SENA
No FC devices found. - /devices/sbus@2,0/SUNW,socal@d,10000/sf@0,0/ses@w50800200000ec1a1,0:0.
was ja irgendwie einleuchtet weil der bescheuerte socal treiber die dinger als scsi devices anspricht (war im sol8 definitv nicht so)
root:/etc/vx> prtdiag -v
System Configuration: Sun Microsystems sun4u 8-slot Sun Enterprise E4500/E5500
System clock frequency: 100 MHz
Memory size: 8192Mb
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ---------------------------- --------------------
1 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
1 SBus 25 1 fcaw/sd (block) FCW
1 SBus 25 2 QLGC,isp/sd (block) QLGC,ISP1000U
1 SBus 25 3 SUNW,hme
1 SBus 25 3 SUNW,fas/sd (block)
1 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
3 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
3 SBus 25 1 QLGC,isp/sd (block) QLGC,ISP1000U
3 SBus 25 2 QLGC,isp/sd (block) QLGC,ISP1000U
3 SBus 25 3 SUNW,hme
3 SBus 25 3 SUNW,fas/sd (block)
3 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
5 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
5 SBus 25 1 network SUNW,sbus-gem
5 SBus 25 2 QLGC,isp/sd (block) QLGC,ISP1000U
5 SBus 25 3 SUNW,hme
5 SBus 25 3 SUNW,fas/sd (block)
5 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
7 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
7 SBus 25 1 QLGC,isp/sd (block) QLGC,ISP1000U
7 SBus 25 2 fcaw/sd (block) FCW
7 SBus 25 3 SUNW,hme
7 SBus 25 3 SUNW,fas/sd (block)
7 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
da ich die arrays gerne wieder mit luxadm administrieren würde ist das ganze ziemlich blöd...hat sich da irgendwas zwischen den releases geändert oder ist das SENA in sol10 gar nicht mehr supportet, was ich nicht denke da ich ja erfolgreich davon boote und auch mit den disks unter veritas arbeiten kann ??? ???
root:/etc/vx> prtconf -vp | grep bootpath
bootpath: '/sbus@a,0/SUNW,socal@d,10000/sf@0,0/ssd@w2100002037e2cf93,0:a'
root:/etc/vx> vxdisk -o alldgs list
DEVICE TYPE DISK GROUP STATUS
SENA_0 auto:cdsdisk c18t37d0 testdg online
SENA_1 auto:cdsdisk SENA_1 testdg online
SENA_2 auto:cdsdisk c18t51d0 testdg online
SENA_3 auto:cdsdisk c18t49d0 testdg online
SENA_4 auto:cdsdisk c18t36d0 testdg online
SENA_5 auto:cdsdisk c18t54d0 testdg online
SENA_6 auto:cdsdisk SENA_6 testdg online
SENA_7 auto:cdsdisk SENA_7 testdg online
SENA_8 auto:cdsdisk c18t50d0 testdg online
SENA_9 auto:cdsdisk c18t53d0 testdg online
SENA_10 auto:sliced - - online
SENA_11 auto:sliced - - online
SENA_12 auto:cdsdisk SENA_12 testdg online
SENA_13 auto:sliced rootdisk rootdg online
SENA_14 auto:sliced rootmirror rootdg online
SENA_15 auto:cdsdisk c2t23d0 testdg online
SENA_16 auto:cdsdisk c2t0d0 testdg online
SENA_17 auto:cdsdisk c2t21d0 testdg online
SENA_18 auto:cdsdisk c2t17d0 testdg online
SENA_19 auto:cdsdisk c2t22d0 testdg online
SENA_20 auto:cdsdisk c2t19d0 testdg online
SENA_21 auto:cdsdisk c2t1d0 testdg online
SENA_22 auto:cdsdisk c2t16d0 testdg online
SENA_23 auto:cdsdisk c2t20d0 testdg online
SENA_24 auto:cdsdisk c2t4d0 testdg online
SENA_25 auto:cdsdisk c2t25d0 testdg online
SENA_26 auto:cdsdisk c2t9d0 testdg online
SENA_27 auto:cdsdisk c2t6d0 testdg online
SENA_28 auto:cdsdisk c2t18d0 testdg online
SENA_29 auto:cdsdisk c2t2d0 testdg online
SENA_30 auto:cdsdisk c2t3d0 testdg online
SENA_31 auto:cdsdisk c18t40d0 testdg online
SENA_32 auto:cdsdisk c2t5d0 testdg online
SENA_33 auto:cdsdisk c2t7d0 testdg online
SENA_34 auto:cdsdisk c18t48d0 testdg online
SENA_35 auto:cdsdisk c18t38d0 testdg online
SENA_36 auto:cdsdisk c7t8d0 testdg online
SENA_37 auto:cdsdisk c18t55d0 testdg online
SENA_38 auto:cdsdisk c14t58d0 testdg online
SENA_39 auto:cdsdisk c18t42d0 testdg online
SENA_40 auto:cdsdisk c18t41d0 testdg online
help
lg
chris
-
Hallo Chris!
Ich hab auch eine E4500 mit (einem) A5200. Allerdings S10 U<irgendwas> "direkt" installiert, kein Live Upgrade, und auch kein Veritas.
Da funktioniert luxadm einwandfrei. Die Kiste ist allerdings länger nicht mehr angewesen...
Viele Grüße -- Volker
-
hi,
ich bin auch eher der meinung das da irgendwelche libraries nicht richtig installiert/upgegradet wurden...hab aber keinen plan wie ich das verifizieren könnte...die SUNWlux* pakete haben jedenfalls das richtige install date....gibts für die a5200 spezielle pakete?
lg
chris
-
ich bin auch eher der meinung das da irgendwelche libraries nicht richtig installiert/upgegradet wurden...hab aber keinen plan wie ich das verifizieren könnte...
Schau Dir doch mal die Optionen von pkgchk an, vielleicht ist da was brauchbares zu dem Zweck dabei.
wolfgang
-
also hab mal mit pkgchk überprüft...alle luxadm pakete/komponenten sind status installed..hab auch gleich mal den aktuellen patch cluster drüber installiert...l, path_to inst socal einträge gelöscht, name_to_major überprüft /dev/dsk/* /dev/rdsk/* removed, driver readded reconfigure reboot -> luxadm ist immer noch beeinträchtigt :(
edit: und auch mal den ganzen fc stack gecheckt....
cat /var/tmp/fcpkg
SUNWjfcau JNI (Corp.) FCA [u]
SUNWjfca JNI (Corp.) FCA device driver
SUNWqlc Qlogic FCA ISP 2200/2202 device driver
SUNWfcp FCP SCSI device driver
SUNWfcip FCIP IP/ARP over fibre channel device driver
SUNWfcsm FCSM driver
SUNWfcmdb FCADB macros and mdb modules
SUNWfctl FCT layer
SUNWluxop SENA firmware and utilities
SUNWluxopr SENA libraries
SUNWcfplr FP cfgadm plug-in library [r]
SUNWcfpl FP cfgadm plug-in library
SUNWfchbar fibre channel HBA library [r]
SUNWfchba fibre channel HBA library [u]
SUNWcfclr fibre channel HBA API library [r]
SUNWcfcl fibre channel HBA API library [u]
cat /var/tmp/fcpkg | awk '{print $1}'| while read line;do pkginfo -l $line | egrep "PKGINST|STATUS";done
PKGINST: SUNWjfcau
STATUS: completely installed
PKGINST: SUNWjfca
STATUS: completely installed
PKGINST: SUNWqlc
STATUS: completely installed
PKGINST: SUNWfcp
STATUS: completely installed
PKGINST: SUNWfcip
STATUS: completely installed
PKGINST: SUNWfcsm
STATUS: completely installed
PKGINST: SUNWfcmdb
STATUS: completely installed
PKGINST: SUNWfctl
STATUS: completely installed
PKGINST: SUNWluxop
STATUS: completely installed
PKGINST: SUNWluxopr
STATUS: completely installed
PKGINST: SUNWcfplr
STATUS: completely installed
PKGINST: SUNWcfpl
STATUS: completely installed
PKGINST: SUNWfchbar
STATUS: completely installed
PKGINST: SUNWfchba
STATUS: completely installed
PKGINST: SUNWcfclr
STATUS: completely installed
PKGINST: SUNWcfcl
STATUS: completely installed
was für ein MIST!!! keine ahnung was ich noch machen könnte....
-
ok hab die kiste reinstalliert...hat das problem ebenfalls nicht gelöst...giving up!
-
ich konnts nicht lassen und hab die luxadm packete von solaris 9 installiert...es funktioniert. ich sag nur "enterprise" grade operating system >:( ansonsten no comment
root:/var/tmp/lux_old> luxadm probe
Found Enclosure(s):
SENA Name:PHOTON-2 Node WWN:50800200000ec1a0
Logical Path:/dev/es/ses0
Logical Path:/dev/es/ses3
Logical Path:/dev/es/ses1
Logical Path:/dev/es/ses2
SENA Name:PHOTON-1 Node WWN:50800200000e8f80
Logical Path:/dev/es/ses7
Logical Path:/dev/es/ses4
Logical Path:/dev/es/ses6
Logical Path:/dev/es/ses5
uxback3_root:/var/tmp/lux_old> luxadm display PHOTON-1
SENA
DISK STATUS
SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN)
0 On (O.K.) 2000002037c8c74d On (O.K.) 20000020379648b4
1 On (O.K.) 2000002037c3ef90 On (O.K.) 2000002037c8c83a
2 Off(Bypassed:AB) On (O.K.) 2000002037c8b8b3
3 On (O.K.) 2000002037c8b870 On (O.K.) 2000002037c8c829
4 On (O.K.) 2000002037c8b5b0 On (O.K.) 2000002037e2a9df
5 On (O.K.) 2000002037c3e30d On (O.K.) 2000002037c8b988
6 On (O.K.) 20000004cf5cd9ed On (O.K.) 2000002037c8c653
7 On (O.K.) 2000002037e2dbff On (O.K.) 200000203796b047
8 On (O.K.) 2000002037ba2344 On (O.K.) 2000002037e2cf93
9 On (O.K.) 200000203738d010 On (O.K.) 2000002037e29c11
10 On (O.K.) 200000203738df31 On (O.K.) 200000203796cb2f
SUBSYSTEM STATUS
FW Revision:1.09 Box ID:1 Node WWN:50800200000e8f80 Enclosure Name:PHOTON-1
Power Supplies (0,2 in front, 1 in rear)
0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02)
Fans (0 in front, 1 in rear)
0 O.K.(rev.-04) 1 O.K.(rev.-00)
ESI Interface board(IB) (A top, B bottom)
A: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Not Installed
B: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Not Installed
Disk backplane (0 in front, 1 in rear)
Front Backplane: O.K.(rev.-04)
Temperature sensors (on front backplane)
0:36ºC 1:36ºC 2:36ºC 3:36ºC 4:36ºC 5:36ºC
6:36ºC 7:36ºC 8:36ºC 9:37ºC 10:36ºC (All temperatures are NORMAL.)
Rear Backplane: O.K.(rev.-04)
Temperature sensors (on rear backplane)
0:37ºC 1:37ºC 2:39ºC 3:39ºC 4:39ºC 5:37ºC
6:39ºC 7:39ºC 8:39ºC 9:39ºC 10:39ºC (All temperatures are NORMAL.)
Interconnect assembly
O.K.(rev.-02)
Loop configuration
Loop A is configured as a single loop.
Loop B is configured as a single loop.
Language USA English
root:/var/tmp/lux_old> luxadm display PHOTON-2
SENA
DISK STATUS
SLOT FRONT DISKS (Node WWN) REAR DISKS (Node WWN)
0 On (O.K.) 200000203763f0d5 On (O.K.) 200000203763f127
1 On (O.K.) 200000203763f0e0 On (O.K.) 200000203763f119
2 On (O.K.) 20000004cf163541 On (O.K.) 20000004cf163510
3 On (O.K.) 20000004cf16359c On (O.K.) 200000203763f12d
4 On (O.K.) 20000004cf163565 On (O.K.) 20000004cf162ad5
5 On (O.K.) 20000004cf177c05 On (O.K.) 200000203763f0c4
6 On (O.K.) 20000004cf161fc6 On (O.K.) 200000203763f0c1
7 On (O.K.) 20000004cf178c29 On (O.K.) 200000203763f14c
8 On (O.K.) 20000004cf5cda5c On (O.K.) 2000002037e2bc65
9 On (O.K.) 20000004cf16354e On (O.K.) 20000004cf162ea6
10 Off(Bypassed:AB) On (Bypassed:AB)
SUBSYSTEM STATUS
FW Revision:1.09 Box ID:0 Node WWN:50800200000ec1a0 Enclosure Name:PHOTON-2
Power Supplies (0,2 in front, 1 in rear)
0 O.K.(rev.-02) 1 O.K.(rev.-02) 2 O.K.(rev.-02)
Fans (0 in front, 1 in rear)
0 O.K.(rev.-04) 1 Non-Critical Failure:Yellow LED is on:Fan speed Hi(rev.-00)
ESI Interface board(IB) (A top, B bottom)
A: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Not Installed
B: O.K.(rev.-04)
GBIC module (1 on left, 0 on right in IB)
0 O.K.(mod.-05)
1 Not Installed
Disk backplane (0 in front, 1 in rear)
Front Backplane: O.K.(rev.-04)
Temperature sensors (on front backplane)
0:37ºC 1:39ºC 2:37ºC 3:37ºC 4:39ºC 5:39ºC
6:40ºC 7:40ºC 8:40ºC 9:42ºC 10:39ºC (All temperatures are NORMAL.)
Rear Backplane: O.K.(rev.-04)
Temperature sensors (on rear backplane)
0:42ºC 1:39ºC 2:40ºC 3:45ºC 4:42ºC 5:42ºC
6:43ºC 7:45ºC 8:45ºC 9:43ºC 10:42ºC (All temperatures are NORMAL.)
Interconnect assembly
O.K.(rev.-02)
Loop configuration
Loop A is configured as a single loop.
Loop B is configured as a single loop.
Language USA English
-
habe meine veritas testkiste mit liveupgrade von sol8 auf sol10 hochgezogen (ich weis ist nicht supportet...)
ich sag nur "enterprise" grade operating system >:( ansonsten no comment
(http://image.ticcity.de/images/imagepool/rowlandsoffice.typepad.comsimpsons_nelson_haha2.jpg)
-
habe meine veritas testkiste mit liveupgrade von sol8 auf sol10 hochgezogen (ich weis ist nicht supportet...)
ich sag nur "enterprise" grade operating system >:( ansonsten no comment
(http://image.ticcity.de/images/imagepool/rowlandsoffice.typepad.comsimpsons_nelson_haha2.jpg)
damit war gemeint das ein lu von 8 auf 10 nicht supportet ist, habe die maschine zwischenzeitlich neu installiert. wie auch immer es ist ne testkiste und es hat in der tat den anschein als ob in den aktuellen sf (u9) treiber kein vollwertiger sena support mehr enthalten ist und mit den sol9 paket bootet die kiste nicht weil sie verständlicher weise das modul nicht laden kann.
{0} ok boot
Boot device: zdisk File and args:
SunOS Release 5.10 Version Generic_144488-11 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
/platform/sun4u/kernel/drv/sparcv9/sf: undefined symbol 'ndi_event_getcookie'
WARNING: mod_load: cannot load module 'sf'
sf: cannot load driver
Cannot load drivers for /sbus@2,0/SUNW,socal@d,10000/sf@0,0/ssd@w2100002037e2bc65,0:a
Can't load the root filesystem
Type 'go' to resume
{0} ok boot -F failsafe
Resetting...
Software Power ON
8-slot Sun Enterprise E4500/E5500, No Keyboard
OpenBoot 3.2.30, 8192 MB memory installed, Serial #9611482.
Copyright 2002 Sun Microsystems, Inc. All rights reserved
Ethernet address 8:0:20:92:a8:da, Host ID: 8092a8da.
Rebooting with command: boot -F failsafe
Boot device: /sbus@2,0/SUNW,socal@d,10000/sf@0,0/ssd@w2100002037e2bc65,0:a File and args: -F failsafe
SunOS Release 5.10 Version Generic_142909-17 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Configuring devices.
SUNW,sbus-gem0: Using Gigabit SERDES Interface
SUNW,sbus-gem0: Auto-Negotiated 1000 Mbps Full-Duplex Link Up
Searching for installed OS instances...
ROOT/zfsroot was found on rootpool.
Do you wish to have it mounted read-write on /a? [y,n,?] y
mounting rootpool on /a
Starting shell.
#
naja mal sehen was ich hiermit anfange *loool* mittlerweile find ichs schon irgendwie witzig...fühl mich irgendwie in meine linux bastelstubenzeiten zurückversetzt.
-
Die Photons waren vor mehr als 10 Jahren aktuell. Ich weiss nicht was das mit Bastelstubenzeiten zu tun haben soll, dass in der aktuellsten Version von Solaris 10 der Support für das Produkt offensichtlich nicht mehr wirklich vorhanden ist.
Photons sind Enterprise Hardware und Sun^H^H^HOracle wird kaum davon ausgehen, dass ausser ein paar Privatpersonen noch irgendjemand auf dieser Welt diese Teile am Laufen hat UND auch noch Solaris 10U9 dazu benutzt.
Gruss
Dominik
-
genau so ist es, es gibt keinen vollständigen support mehr für diese kombo...habe zu solaris 9 geswitched veritas läuft, luxadm läuft, veritas zertifizierung kann kommen ...mission completed! 8)