Autor Thema: Seagate ST340015A in Ultra 10  (Gelesen 3775 mal)

Ford_Prefect

  • Gast
Seagate ST340015A in Ultra 10
« am: 24. September 2003, 20:00:05 »
Hat es schon einmal jemand geschafft, die o.a. Platte in einer Ultra 10 an's fliegen zu bekommen? Zunächst wird die Platte nur als 8GB erkannt. Ein manuelles Eingeben der Parameter hilft nicht. Auf diesen 8GB läßt sich Sol 2.6 problemlos installieren. Die Maschine lief danach auch mehrere Tage ohne Probleme. Nach dem 5. Reboot wurde die Platte dann nicht mehr erkannt.  :'(
Angeblich muß die Platte eine andere Firmware erhalten. Gibt es dafür einen Workaround?  ???

Gruß,

 Andreas

sonnenblen.de - Das unabhängige Sun User Forum

Seagate ST340015A in Ultra 10
« am: 24. September 2003, 20:00:05 »

Offline Sparky

  • Sobl Moderator
  • Sobl Guru
  • *****
  • Beiträge: 3260
  • HyperSPARC ! Das fetzt......
    • HyperSTATION
Re: Seagate ST340015A in Ultra 10
« Antwort #1 am: 24. September 2003, 21:00:13 »
Wie ist die Platte gejumpert ?
www.hyperstation.de
alles zu HyperSPARC, SBus-Karten und AG-10E Howto

Offline maal

  • Global Moderator
  • Sobl Guru
  • *****
  • Beiträge: 1529
  • Ich mag keine Signaturen!
Re: Seagate ST340015A in Ultra 10
« Antwort #2 am: 26. September 2003, 01:13:34 »
Hallo Ford_Prefect,

es wäre nett gewesen, wenn Du neben dem Typ auch die Kapazität gepostet hättest (könnten aber 40 GB sein).

Solaris 2.6 kann von Haus aus keine Platten > 8 GB.

Da ich zu bequem bin das Folgende zu übersetzen stattdessen der englischsprachige Auszug aus dem Solaris FAQ:

5.64) I have a problem with large disk drives.

   Various releases of Solaris have different upper limits in the size of the IDE disks they support.  For SCSI, there are really no such limits, though older versions of format do not support really large raids.

   All releases support IDE disks <= 8GB; support for those disks is primarily a BIOS issue on Intel.

   Support for IDE disks between 8 and 32 GB was added in Solaris 7/SPARC and Solaris 8/Intel.  Note the difference in release between architectures.

   Support for IDE disks over 32 GB was added to Solaris 8 10/00 for both SPARC and Intel.

   Solaris releases that support IDE disks upto 8GB will truncate larger disks to 8GB.  To use such disks to the max after upgrading to a later release of Solaris/SPARC requires zeroing the disk label with dd before relabeling it.

   Solaris releases that support disks between 8GB and 32 GB will truncate the disk to "real size modulo 32GB".  I.e., a 40GB or 72GB disk becomes a 8GB one, a 33GB or 65GB disk becomes 1GB, etc.

   SPARC/IDE systems have no OpenBoot issues with disks over 8GB and can boot fine from beyond the 8GB/32GB mark.

   Solaris/Intel didn't support IDE disks > 8GB until release 8; BIOS permitting, Solaris 8 can even boot from beyond the GB mark.
   Older Solaris/Intel releases have a hard time coping with such big disks.


Michael
« Letzte Änderung: 26. September 2003, 01:29:29 von maal »