Autor Thema: The IDPROM contents are invalid an ULTRA 2  (Gelesen 5006 mal)

Offline Freud-Schiller

  • Sobl Guru
  • *****
  • Beiträge: 927
The IDPROM contents are invalid an ULTRA 2
« am: 07. August 2007, 20:55:44 »
Hi Leute, ich bekomme folgenden OUTPUT:


Software Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled

@(#) Sun Ultra 2 UPA/SBus 3.25 Version 0 created 1999/12/03 11:35
Clearing DTAGS  Done
Probing Memory Done
MEM BASE = 0000.0000.6000.0000
MEM SIZE = 0000.0000.1000.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.2c60
PC = 0000.0000.0000.2ca4
Decompressing into Memory Done
Size = 0000.0000.0006.70e0
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0   0   0   0   0 :   0 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3  64  64  64  64 : 256 Megabytes
Probing UPA Slot at 1e,0 SUNW,ffb
Probing /sbus@1f,0 at e,0  SUNW,fas sd st SUNW,hme SUNW,bpp
Probing /sbus@1f,0 at 0,0  Nothing there
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
Probing /sbus@1f,0 at 3,0  Nothing there
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0   0   0   0   0 :   0 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3  64  64  64  64 : 256 Megabytes
Probing UPA Slot at 1e,0 SUNW,ffb
Probing /sbus@1f,0 at e,0  SUNW,fas sd st SUNW,hme SUNW,bpp
Probing /sbus@1f,0 at 0,0  Nothing there
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
Probing /sbus@1f,0 at 3,0  Nothing there

Sun Ultra 2 UPA/SBus (UltraSPARC 168MHz), No Keyboard
OpenBoot 3.25, 256 MB memory installed, Serial #556936.
Ethernet address 0:3:ba:8:7f:88, Host ID: 83087f88.


The IDPROM contents are invalid


wie kann das sein? netmask und host id sind doch da...

kann das mir jemand mal bitte erklären?

viele Grüße David

sonnenblen.de - Das unabhängige Sun User Forum

The IDPROM contents are invalid an ULTRA 2
« am: 07. August 2007, 20:55:44 »

Offline Freud-Schiller

  • Sobl Guru
  • *****
  • Beiträge: 927
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #1 am: 07. August 2007, 21:09:08 »
noch mal den diag-level max output :D

ø
Hardware Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled

Button Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled

Button Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled

Probing keyboard Done
%o0 = 0000.0000.0000.4001

Executing Power On SelfTest

0>@(#)  Sun Ultra Enterprise 2 FCS_POST, version SB3.3.8 11/16/1998 1:42 PM
0>   UltraSparc1 Version 4.0
0>Ecache Probe
0>   Ecache size 512 Kb
0>Ecache Tag Test
0>Ecache RAM Test
0>Ecache Address Line Test
0>Initialize and Verify Ecache
0>SC Initialization
0>    SC_MP id=acf1, UPA Number=4, Impl=0, Ver=3
0>SC Dual Tag RAM Test
0>    Clearing DTAG's.
0>Initialize SC_MP memory control registers
0>BMX Test
0>    Checking BMX's
0>Probing Memory
0>   Found Memory Group #3      64Mb   64Mb   64Mb   64Mb
0>            Found  256 Megabytes of usable Main Memory
0>SIMM Group      Base Addr         Size    Group Status
0>   3         00000000.60000000   10000000     00
0>Quick Memory Test
0>Clear and Test Stack Memory
0>
    SelfTest Initializing
0>Basic CPU Test
0>    Instruction Cache Tag RAM Test
0>    Instruction Cache Instruction RAM Test
0>    Instruction Cache Next Field RAM Test
0>    Instruction Cache Pre-decode RAM Test
0>    Data Cache RAM Test
0>    Data Cache Tags Test
0>MMU Enable Test
0>    DMMU Registers Access Test
0>    DMMU TLB DATA RAM Access Test
0>    DMMU TLB TAGS Access Test
0>    IMMU Registers Access Test
0>    IMMU TLB DATA RAM Access Test
0>    IMMU TLB TAGS Access Test
0>    DMMU Init
0>    IMMU Init
0>    Mapping Selftest Enabling MMUs
0>FPU Register Test
0>    FPU Registers and Data Path Test
0>    FSR Read/Write Test
0>EPROMs Test
0>    PROM Datapath Test
0>Serial Ports Test
0>    Slavio Serial Ports Test
0>NVRAM TOD Test
0>    M48T59 (TOD) Init
0>    M48T59 (TOD) Functional Part 1 Test
0>Memory Test
0>    Memory Clear Test
0>   Test being relocated into Memory
0>    Memory RAM (blk) Test
0>   Test being relocated into Memory
0>    Memory Stress Test
0>   Test being relocated into Memory
0>    Memory Address Line Test
0>   Test being relocated into Memory
0>Forcing ECC Faults Test
0>    ECC CE Pattern Test
0>    ECC CE Check bit Test
0>    ECC UE Pattern Test
0>    ECC UE Check bit Test
0>SysIO Registers Test
0>    SysIO Regsiter Initialization
0>    IOMMU Registers and RAM Test
0>    Streaming Buffer Registers and RAM Test
0>    SBus Control and Config Registers Test
0>    SysIO RAM Initialization
0>SysIO Functional Test
0>    Mapping Selftest Enabling MMUs
0>    Clear Interrupt Map and State Registers
0>    SysIO Interrupts  Test
0>    SysIO Timers/Counters Test
0>    IOMMU Virtual Address TLB Tag Compare Test
0>    Streaming Buffer Flush Test
0>    DMA Merge Buffer Test
0>CPU Speed
0>    CPU 0 Running at 168 MHZ.
0>Ecache Stress Test
0>    Ecache Stress Test
0>APC Test
0>    APC Registers Tests Test
0>    APC DVMA Test
0>Data Cache Test
0>    Dcache Init
0>    Dcache Enable Test
0>    Dcache Functionality Test
0>FEPS Test
0>    Parallel Port Registers Test
0>       Parallel Port ID is: 0x2
0>    Parallel Port DVMA burst mode read/write Test
0>    FAS366 Registers Test
0>    ESP FAS366 DVMA burst mode read/write Test
0>    FEPS Internal Loopbacks Test
0>    Ethernet Tranceiver Internal Loopbacks Test
0>CPU Functional Test
0>    Mapping Selftest Enabling MMUs
0>    SPARC Atomic Instructions Test
0>    CPU Dispatch Control Register Test
0>    CPU Softint Registers and Interrupts Test
0>    CPU Tick and Tick Compare Registers Test
0>    Uni-Processor Cache Coherence Test
0>      Base_address = 60100000
0>    UltraSPARC-2 Prefetch Instructions Test
0>      *UltraSparc-1 module detected, tests skipped
0>
     << POST COMPLETE >>
0>**Entering OBP (3b)


Power On Selftest Completed
    Status  = 0000.0000.0000.0000 0000.01ff.f007.87f0 1f66.0000.01c1.0105


Software Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled

@(#) Sun Ultra 2 UPA/SBus 3.25 Version 0 created 1999/12/03 11:35
Clearing DTAGS  Done
Probing Memory Done
MEM BASE = 0000.0000.6000.0000
MEM SIZE = 0000.0000.1000.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.2c60
PC = 0000.0000.0000.2ca4
Decompressing into Memory Done
Size = 0000.0000.0006.70e0
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0   0   0   0   0 :   0 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3  64  64  64  64 : 256 Megabytes
Probing UPA Slot at 1e,0 SUNW,ffb
Probing /sbus@1f,0 at e,0  SUNW,fas sd st SUNW,hme SUNW,bpp
Probing /sbus@1f,0 at 0,0  Nothing there
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
Probing /sbus@1f,0 at 3,0  Nothing there

Offline Padde

  • Sobl Bachelor
  • ***
  • Beiträge: 135
  • Hier könnte Ihre Werbung stehen!
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #2 am: 07. August 2007, 22:34:51 »
Probing Memory Bank #0   0   0   0   0 :   0 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3  64  64  64  64 : 256 Megabytes

Das Service Manual (Seite 10-17) sagt: "The Ultra 2 system and server units must have four DSIMMs in group 0 for the unit to boot." Bei dir sind aber sämtliche Module in der dritten Gruppe. Vielleicht liegt der Fehler daran, obwohl die Fehlermeldung dann eigentlich keinen Sinn machen würde.  ???

Offline escimo

  • Sobl Moderator
  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #3 am: 07. August 2007, 23:14:41 »
Hi David,

The IDPROM contents are invalid
verstehe ich diese Meldung so, dass Solaris nicht initialisiert wird?

Hast du eine neue CPU installiert?

Hast du ein OBP-Update durchgeführt?

Was passiert, wenn du Padde's Vorschlag annimmst und den Speicher in die Bank 0 installierst.

Gruß
Stephan

PS: Danke für die PM ;)

Offline Sparky

  • Sobl Moderator
  • Sobl Guru
  • *****
  • Beiträge: 3260
  • HyperSPARC ! Das fetzt......
    • HyperSTATION
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #4 am: 08. August 2007, 06:24:09 »
Hi Leute, ich bekomme folgenden OUTPUT:

SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0   0   0   0   0 :   0 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3  64  64  64  64 : 256 Megabytes

Probing /sbus@1f,0 at 3,0  Nothing there
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0   0   0   0   0 :   0 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3  64  64  64  64 : 256 Megabytes

David bitte!
Das die Speicherbänke immer von Bank 0 an bestückt werden müssen, das müsste ausgerechnet Dir als
eingefleischter SPARC-User schon längst ins Blut übergegangen sein.........
www.hyperstation.de
alles zu HyperSPARC, SBus-Karten und AG-10E Howto

Offline Freud-Schiller

  • Sobl Guru
  • *****
  • Beiträge: 927
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #5 am: 08. August 2007, 07:31:25 »
@ Padde & Sparky Asche über mein Haupt !!! Ok,

SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0  64  64  64  64 : 256 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3   0   0   0   0 :   0 Megabytes

aber die Meldung geht immer noch nicht weg... ich verstehe das nicht ???

@ Stephan: Solaris startet... ohne Fehlermeldungen und die IP/Netz Konfiguration des Vorbesitzers ist verfügbar

Offline Freud-Schiller

  • Sobl Guru
  • *****
  • Beiträge: 927
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #6 am: 08. August 2007, 07:41:55 »
ok .idprom
Format/Type: 1 83 Ethernet: 0 3 ba 8 7f 88 Date: 0 0 0 0
Serial: 8 7f 88 Checksum: 3a
ok date
08/07/2007 17:07:55  GMT
ok

ok, das problem ist jetzt klar... Doch wie bekomme ich das Datum in das NVRAM? Irgendwie sieht der Inhalt auch nicht richtig aus... das NVRAM hat auch ein "lockeres" Label... vllt stammt es aus einer anderen Kiste...

Nachtrag: ALLEINE die Ethernet Adresse  :o das kann doch nicht richtig sein
« Letzte Änderung: 08. August 2007, 07:50:24 von Freud-Schiller »

Offline Freud-Schiller

  • Sobl Guru
  • *****
  • Beiträge: 927
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #7 am: 08. August 2007, 10:00:18 »
øIncorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Probing Memory Bank #0  64  64  64  64 : 256 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3   0   0   0   0 :   0 Megabytes
Probing UPA Slot at 1e,0 SUNW,ffb
Probing /sbus@1f,0 at e,0  SUNW,fas sd st SUNW,hme SUNW,bpp
Probing /sbus@1f,0 at 0,0  Nothing there
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
Probing /sbus@1f,0 at 3,0  Nothing there
Incorrect configuration checksum;
Setting NVRAM parameters to default values.
Setting diag-switch? NVRAM parameter to true
Probing Memory Bank #0  64  64  64  64 : 256 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3   0   0   0   0 :   0 Megabytes
Probing UPA Slot at 1e,0 SUNW,ffb
Probing /sbus@1f,0 at e,0  SUNW,fas sd st SUNW,hme SUNW,bpp
Probing /sbus@1f,0 at 0,0  Nothing there
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
Probing /sbus@1f,0 at 3,0  Nothing there

Sun Ultra 2 UPA/SBus (UltraSPARC 168MHz), No Keyboard
OpenBoot 3.25, 256 MB memory installed, Serial #8767706.
Ethernet address 8:0:20:85:c8:da, Host ID: 8085c8da.



Boot device: net  File and args:
Using Onboard Transceiver -
ok 8 0 20 13 de ad 087f88 mkpl
Copyright (c) 1989 Sun Microsystems
ok 0 f 0 do i idprom@ xor loop f mkp
ok reset
Resetting ...


Software Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled

@(#) Sun Ultra 2 UPA/SBus 3.25 Version 0 created 1999/12/03 11:35
Clearing DTAGS  Done
Probing Memory Done
MEM BASE = 0000.0000.0000.0000
MEM SIZE = 0000.0000.1000.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.2c60
PC = 0000.0000.0000.2ca4
Decompressing into Memory Done
Size = 0000.0000.0006.70e0
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0  64  64  64  64 : 256 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3   0   0   0   0 :   0 Megabytes
Probing UPA Slot at 1e,0 SUNW,ffb
Probing /sbus@1f,0 at e,0  SUNW,fas sd st SUNW,hme SUNW,bpp
Probing /sbus@1f,0 at 0,0  Nothing there
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
Probing /sbus@1f,0 at 3,0  Nothing there
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0  64  64  64  64 : 256 Megabytes
Probing Memory Bank #1   0   0   0   0 :   0 Megabytes
Probing Memory Bank #2   0   0   0   0 :   0 Megabytes
Probing Memory Bank #3   0   0   0   0 :   0 Megabytes
Probing UPA Slot at 1e,0 SUNW,ffb
Probing /sbus@1f,0 at e,0  SUNW,fas sd st SUNW,hme SUNW,bpp
Probing /sbus@1f,0 at 0,0  Nothing there
Probing /sbus@1f,0 at 1,0  Nothing there
Probing /sbus@1f,0 at 2,0  Nothing there
Probing /sbus@1f,0 at 3,0  Nothing there

Sun Ultra 2 UPA/SBus (UltraSPARC 168MHz), No Keyboard
OpenBoot 3.25, 256 MB memory installed, Serial #8767706.
Ethernet address 8:0:20:85:c8:da, Host ID: 8085c8da.



fall gelöst. ich habe das nvram getauscht, hatte noch eins in reserve  :D

Danke an Alle und Jürgen sei nicht böse wegen dem RAM  ;D

Offline escimo

  • Sobl Moderator
  • Sobl Guru
  • *****
  • Beiträge: 1674
  • SPARCstation 2
    • Youtube-Kanal opensparcbox.org
Re: The IDPROM contents are invalid an ULTRA 2
« Antwort #8 am: 08. August 2007, 14:06:34 »
...Date: 0 0 0 0...Doch wie bekomme ich das Datum in das NVRAM? Irgendwie sieht der Inhalt auch nicht richtig aus...
Der Wert ist in Ordnung. Bei all meinen Maschinen sind selbige Werte "0 0 0 0" eingetragen. Inwieweit anderer Werte den Boot-Prozess beziehungsweise den Betrieb stören, davon ist mir nichts bekannt.

Gruß
escimo