Hardware > Sun SPARC

Sparc Station 2 kein Bild - Monitor schaltet ab

<< < (3/11) > >>

Sammler:
Hier der Output, nachdem das Keyboard abgeklemmt wurde:


--- Code: ---EPROM Checksum Test
Power-Up State Test
Context Register Test
Segment Map RAM MATS Pattern Test, Context 00000000
Segment Map RAM MATS Pattern Test, Context 00000001
Segment Map RAM MATS Pattern Test, Context 00000002
Segment Map RAM MATS Pattern Test, Context 00000003
Segment Map RAM MATS Pattern Test, Context 00000004
Segment Map RAM MATS Pattern Test, Context 00000005
Segment Map RAM MATS Pattern Test, Context 00000006
Segment Map RAM MATS Pattern Test, Context 00000007
Segment Map RAM MATS Pattern Test, Context 00000008
Segment Map RAM MATS Pattern Test, Context 00000009
Segment Map RAM MATS Pattern Test, Context 0000000a
Segment Map RAM MATS Pattern Test, Context 0000000b
Segment Map RAM MATS Pattern Test, Context 0000000c
Segment Map RAM MATS Pattern Test, Context 0000000d
Segment Map RAM MATS Pattern Test, Context 0000000e
Segment Map RAM MATS Pattern Test, Context 0000000f
Page Map RAM MATS Pattern Test
Limit 0 Register Test
Counter Interrupt Level 10 Test
Limit 1 Register Test
Counter Interrupt Level 14 Test
WARNING: Unable to determine keyboard type
Synchronous Error Reg Test
Synchronous Error Virtual Address Reg Test
Asynchronous Error Reg Test
Asynchronous Error Virtual Address Reg Test
Asynchronous Error Data Reg1 Test
Asynchronous Error Data Reg2 Test
System Enable Register Bit Test
Cache Data RAM MATS Pattern Test
Cache Tag RAM MATS Pattern Test
PTE Access Bit Test
PTE Modify Bit Test
PTE Write-Protect Bit Test
PTE Write-Invalid Bit Test
PTE Read-Invalid Bit Test
PTE Type 2 Space Bit Test
PTE Type 3 Space Bit Test
Synchronous Timeout Test
Asynchronous Timeout Test
**** 16 MegaBytes Found in Address Range 0x00000000 to 0x00ffffff ****
**** 16 MegaBytes Found in Address Range 0x01000000 to 0x01ffffff ****
**** 16 MegaBytes Found in Address Range 0x02000000 to 0x02ffffff ****
**** 16 MegaBytes Found in Address Range 0x03000000 to 0x03ffffff ****
DRAM Word MATS Pattern Test (0x00fe0000 - 0x01000000)
Parity/Memory Control Registers Bit Test
36-bit SIMM Parity Test
33-bit SIMM Parity Test
Interrupt Register Test
Software Interrupt Level 1 Test
Software Interrupt Level 4 Test
Software Interrupt Level 6 Test
NVRAM Access Test
TOD Clock Oscillator Running
TOD Registers Test
Cache Statistics Bit Update Test
Cache Doubleword-Alignment Read Miss Test
Cache TAG Comparator Read Miss Test
Cache Non-Cacheable Read Miss Test
Cache Read Miss Parity Test
Cache Doubleword-Alignment Read Hit Test
Cache Byte-Alignment Read Hit Test
Cache Read Hit Context Test
Cache Read Hit MMU Invalid Test
Cache Doubleword-Alignment Write Hit Test
Cache TAG Comparator Write Hit Test
Cache Write Hit Context Test
Cache Write Hit/Miss (Cacheable) Test
Cache Write Hit/Miss (Non-Cacheable) Test
Cache Write Miss Test
Software Context Flush Test
Software Segment Flush Test
Software Page Flush Test
Hardware Context Flush Test
Hardware Segment Flush Test
Hardware Page Flush Test
Unconditional Block Flush Test
FPU Misaligned Register Pair Test
FPU Single-Precision Test
Single-Precision FPU Exception (Invalid Result) Test
Single-Precision FPU Exception (Overflow) Test
Single-Precision FPU Exception (Underflow) Test
Single-Precision FPU Exception (Divide-by-0) Test
Single-Precision FPU Exception (Inexact Result) Test
Single-Precision FPU Exception and Timeout Test
Single-Precision FPU Exception and Data-Access Trap Test
Single-Precision FPU Exception and Misalignment Test
Single-Precision FPU Exception and Asynchronous Trap Test
FPU Double-Precision Test
Double-Precision FPU Exception (Invalid Result) Test
Double-Precision FPU Exception (Overflow) Test
Double-Precision FPU Exception (Underflow) Test
Double-Precision FPU Exception (Divide-by-0) Test
Double-Precision FPU Exception (Inexact Result) Test
Double-Precision FPU Exception and Timeout Test
Double-Precision FPU Exception and Data-Access Trap Test
Double-Precision FPU Exception and Misalignment Test
Double-Precision FPU Exception and Asynchronous Trap Test


Setting Segment Map
Sizing Memory
Mapping ROM
Mapping RAM
Probing /sbus@1,f8000000 at 1,0  Nothing there
Probing /sbus@1,f8000000 at 2,0
Probing /sbus@1,f8000000 at 3,0  Nothing there
Can't open input device.

--- Ende Code ---

Danach passiert nichts mehr, keine Rekation auf das Breaksignal oder auf sonst etwas...

dominik:
Das ist sehr seltsam. Seriell (d.h. ohne angehängte Tastatur) müsste er eigentlich nach "Can't open input device" ins OBP kommen. Boote mal mit angeschlossener Tastatur und drücke nach dem Einschalten STOP-N, dann setzt er das NVRAM zurück.

Gruss
Dominik

Sammler:
Habe die GraKa entfernt und er zählt den Speicher von 64 runter ...
Jetzt funktioniert auch der Break...


--- Code: ---EPROM Checksum Test
Power-Up State Test
Context Register Test
Segment Map RAM MATS Pattern Test, Context 00000000
Segment Map RAM MATS Pattern Test, Context 00000001
Segment Map RAM MATS Pattern Test, Context 00000002
Segment Map RAM MATS Pattern Test, Context 00000003
Segment Map RAM MATS Pattern Test, Context 00000004
Segment Map RAM MATS Pattern Test, Context 00000005
Segment Map RAM MATS Pattern Test, Context 00000006
Segment Map RAM MATS Pattern Test, Context 00000007
Segment Map RAM MATS Pattern Test, Context 00000008
Segment Map RAM MATS Pattern Test, Context 00000009
Segment Map RAM MATS Pattern Test, Context 0000000a
Segment Map RAM MATS Pattern Test, Context 0000000b
Segment Map RAM MATS Pattern Test, Context 0000000c
Segment Map RAM MATS Pattern Test, Context 0000000d
Segment Map RAM MATS Pattern Test, Context 0000000e
Segment Map RAM MATS Pattern Test, Context 0000000f
Page Map RAM MATS Pattern Test
Limit 0 Register Test
Counter Interrupt Level 10 Test
Limit 1 Register Test
Counter Interrupt Level 14 Test
WARNING: Unable to determine keyboard type
Synchronous Error Reg Test
Synchronous Error Virtual Address Reg Test
Asynchronous Error Reg Test
Asynchronous Error Virtual Address Reg Test
Asynchronous Error Data Reg1 Test
Asynchronous Error Data Reg2 Test
System Enable Register Bit Test
Cache Data RAM MATS Pattern Test
Cache Tag RAM MATS Pattern Test
PTE Access Bit Test
PTE Modify Bit Test
PTE Write-Protect Bit Test
PTE Write-Invalid Bit Test
PTE Read-Invalid Bit Test
PTE Type 2 Space Bit Test
PTE Type 3 Space Bit Test
Synchronous Timeout Test
Asynchronous Timeout Test
**** 16 MegaBytes Found in Address Range 0x00000000 to 0x00ffffff ****
**** 16 MegaBytes Found in Address Range 0x01000000 to 0x01ffffff ****
**** 16 MegaBytes Found in Address Range 0x02000000 to 0x02ffffff ****
**** 16 MegaBytes Found in Address Range 0x03000000 to 0x03ffffff ****
DRAM Word MATS Pattern Test (0x00fe0000 - 0x01000000)
Parity/Memory Control Registers Bit Test
36-bit SIMM Parity Test
33-bit SIMM Parity Test
Interrupt Register Test
Software Interrupt Level 1 Test
Software Interrupt Level 4 Test
Software Interrupt Level 6 Test
NVRAM Access Test
TOD Clock Oscillator Running
TOD Registers Test
Cache Statistics Bit Update Test
Cache Doubleword-Alignment Read Miss Test
Cache TAG Comparator Read Miss Test
Cache Non-Cacheable Read Miss Test
Cache Read Miss Parity Test
Cache Doubleword-Alignment Read Hit Test
Cache Byte-Alignment Read Hit Test
Cache Read Hit Context Test
Cache Read Hit MMU Invalid Test
Cache Doubleword-Alignment Write Hit Test
Cache TAG Comparator Write Hit Test
Cache Write Hit Context Test
Cache Write Hit/Miss (Cacheable) Test
Cache Write Hit/Miss (Non-Cacheable) Test
Cache Write Miss Test
Software Context Flush Test
Software Segment Flush Test
Software Page Flush Test
Hardware Context Flush Test
Hardware Segment Flush Test
Hardware Page Flush Test
Unconditional Block Flush Test
FPU Misaligned Register Pair Test
FPU Single-Precision Test
Single-Precision FPU Exception (Invalid Result) Test
Single-Precision FPU Exception (Overflow) Test
Single-Precision FPU Exception (Underflow) Test
Single-Precision FPU Exception (Divide-by-0) Test
Single-Precision FPU Exception (Inexact Result) Test
Single-Precision FPU Exception and Timeout Test
Single-Precision FPU Exception and Data-Access Trap Test
Single-Precision FPU Exception and Misalignment Test
Single-Precision FPU Exception and Asynchronous Trap Test
FPU Double-Precision Test
Double-Precision FPU Exception (Invalid Result) Test
Double-Precision FPU Exception (Overflow) Test
Double-Precision FPU Exception (Underflow) Test
Double-Precision FPU Exception (Divide-by-0) Test
Double-Precision FPU Exception (Inexact Result) Test
Double-Precision FPU Exception and Timeout Test
Double-Precision FPU Exception and Data-Access Trap Test
Double-Precision FPU Exception and Misalignment Test
Double-Precision FPU Exception and Asynchronous Trap Test


Setting Segment Map
Sizing Memory
Mapping ROM
Mapping RAM
Probing /sbus@1,f8000000 at 1,0  Nothing there
Probing /sbus@1,f8000000 at 2,0  Nothing there
Probing /sbus@1,f8000000 at 3,0  Nothing there
screen
Can't open input device.
SPARCstation 2, No Keyboard
ROM Rev. 2.2, 64 MB memory installed, Serial #16777215.
Ethernet address ff:ff:ff:ff:ff:ff, Host ID: ffffffff.


The IDPROM contents are invalid
Testing  64 megs of memory. Still to go    0
scrubbing  16 megs of memory at addr        0   0
Boot device: /sbus/le@0,c00000   File and args:
Internal loopback test --
Did not receive expected loopback packet.
Can't open boot device

Type b (boot), c (continue), or n (new command mode)
>



--- Ende Code ---

Sammler:
So, habe das NVRam neu programmiert ;)

Soweit so guit, bekomme auch einen Login Prompt auf der Konsole.


--- Code: ---The IDPROM contents are invalid
Testing   1 megs of memory. Still to go    0
Boot device: /sbus/esp@0,800000/sd@3,0   File and args:
SunOS Release 5.3 Version Generic_101318-59 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1993, Sun Microsystems, Inc.
WARNING: TOD clock not initialized -- CHECK AND RESET THE DATE!
configuring network interfaces:le0:  No carrier - transceiver cable problem?
 le0.
Hostname: sun4c
The / file system (/dev/rdsk/c0t3d0s0) is being checked.
/dev/rdsk/c0t3d0s0: 15044 files, 170422 used, 141425 free
/dev/rdsk/c0t3d0s0: (1401 frags, 17503 blocks, 0.4% fragmentation)
/dev/rdsk/c0t3d0s0 FILE SYSTEM STATE SET TO OKAY
The system is coming up.  Please wait.
NIS domainname is sunham.Germany.Sun.COM
le0:  No carrier - transceiver cable problem?
le0:  No carrier - transceiver cable problem?
le0:  No carrier - transceiver cable problem?
starting routing daemon.
starting rpc services: rpcbind keyserv kerbd done.
Setting netmask of le0 to 255.255.255.0
le0:  No carrier - transceiver cable problem?
Setting default interface for multicast: add net 224.0.0.0: gateway sun4c
syslog service starting.
Print services started.
volume management starting.
The system is ready.

sun4c console login:

--- Ende Code ---

Würde mich jetzt freuen, wenn das ganze auch über den Bildschirm gehen würde.
Muss man die Grafik-Karte irgendwie aktivieren?
Wenn ja, wie?

maal:
Hallo Uwe,

... habe das NVRam neu programmiert

The IDPROM contents are invalid

Scheint aber nicht ganz geklappt zu haben !

Würde mich jetzt freuen, wenn das ganze auch über den Bildschirm gehen würde.
Muss man die Grafik-Karte irgendwie aktivieren?

Solange keine (direkt angeschlossene) Tastatur erkannt wird, kommt auch nichts auf dem Bildschirm. Wahrscheinlich ist ein Stift im Tastaturstecker verbogen.

Ich würde empfehlen solange mit der seriellen Console zu arbeiten, bis das NVRAM richtig programmiert ist. Außerdem solltest du dir eine Kommando-Referenz für OBP beschaffen. Die SS2 hat OBP 2 (die Handbücher dafür nennen keine Versionnummer, spätere Versionen sind 3 und 4, was auch dann im Titel steht). Suche einfach auf docs.sun.com die ältesten Dokumente mit dem Stichwort OBP (.. im Titel).

Hast du eigentlich auch ein externes SCSI-CD-Laufwerk und (alte) Solaris Medien ?
 
Michael

P.S.: NIS domainname is sunham.Germany.Sun.COM hört sich schon interessant an.

Navigation

[0] Themen-Index

[#] Nächste Seite

[*] Vorherige Sete