Hardware > Sun SPARC
Ultra 80: Problem beim Laden des Solaris 64-Bit Kernels
escimo:
--- Zitat von: maal am 04. Februar 2008, 18:32:52 ---Was du selbst noch probieren kannst, ist mit verbose-Option (also boot cdrom -v) zu booten, dann werden ausführlichere Informationen angezeigt.
...
Zweite Sache: Mit set-defaults auf die Standard-Werte zurücksetzen.
--- Ende Zitat ---
Hi Michael, vielen Dank. Ich werde es gleich am Freitag, wenn ich wieder daheim bin, probieren mit den zwei Varianten.
Grüße
escimo
EDIT: Könnte jemand, der im Besitz einer Ultra 80 Workstation ist, seinen Output zum OBP-Kommando printenv hier einstellen, damit ich einen Vergleich für das Wochenende habe?
--- Zitat ---SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
--- Ende Zitat ---
Das scheint wohl doch nichts ernstes zu sein.
Freud-Schiller:
--- Zitat von: escimo am 04. Februar 2008, 19:37:37 ---EDIT: Könnte jemand, der im Besitz einer Ultra 80 Workstation ist, seinen Output zum OBP-Kommando printenv hier einstellen, damit ich einen Vergleich für das Wochenende habe?
--- Ende Zitat ---
Donnerstag bekommst Du die Infos :)
maal:
Hallo,
ich habe jetzt im FEH nachgesehen. Diese "kritischen" Settings sind eher für andere Systeme (E250, E450). Bei der U80 bzw. Systeme mit dem selben Systemboard, wurden diese nicht aufgeführt.
mfg-options für die E450 findet du in Band 1, Seite INTRO-21. Für die Ultra 80 müßte man im Service Manual nachsehen.
Nun habe ich auch den entsprechenden Beitrag über den "Hänger" bei der SPARCengine Ultra AXi gefunden (nur Google-Cache, da die Beiträge nicht migriert wurden). Bei ausführlicher Ausgabe der Meldungen konnte man sehen wo das System hängt.
"When I have user command boot cdrom -v it stucked after
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0"
Das läßt sich zwar wahrscheinlich nicht auf dein Problem anwenden, ist aber trotzdem einen Versuch wert.
Michael
Freud-Schiller:
--- Code: ---Software Power ON
Master CPU : 0000.0000.0055.11a0
Slave CPU : 0000.0001.0055.11a0
Slave CPU : 0000.0002.0055.11a0
Slave CPU : 0000.0003.0055.11a0
Master E$ : 0000.0000.0040.0000
Slave E$ : 0000.0000.0040.0000
Slave E$ : 0000.0000.0040.0000
Slave E$ : 0000.0000.0040.0000
@(#) UPA/PCI 3.23 Version 0 created 1999/06/30 13:53
Clearing DTAGS Done
Probing Memory
CONFIG = 0000.0000.1010.1010
MEM BASE = 0000.0000.0000.0000
MEM SIZE = 0000.0001.0000.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.2a50
PC = 0000.0000.0000.2a94
Decompressing into Memory Done
Size = 0000.0000.0006.ef90
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0 1 1 1 1 : 4 Gigabytes
Probing Floppy: No drives detected
Probing EBUS SUNW,CS4231
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at 1d,0 Nothing there
Probing /pci@1f,4000 at Device 1 pci108e,1000 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 SUNW,XVR-100
Probing /pci@1f,2000 at Device 1 Nothing there
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0 1 1 1 1 : 4 Gigabytes
Probing Floppy: No drives detected
Probing EBUS SUNW,CS4231
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at 1d,0 Nothing there
Probing /pci@1f,4000 at Device 1 pci108e,1000 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 SUNW,XVR-100
Probing /pci@1f,2000 at Device 1 Nothing there
Sun Ultra 80 UPA/PCI (4 X UltraSPARC-II 450MHz), No Keyboard
OpenBoot 3.23, 4096 MB memory installed, Serial #15730451.
Ethernet address 8:0:20:f0:7:13, Host ID: 80f00713.
{0} ok printenv
Variable Name Value Default Value
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pcia-probe-list 1 1
pcib-probe-list 1,3,2,4,5 1,3,2,4,5
enclosure-type 540-3871
banner-name Sun Ultra 80 UPA/PCI
energystar-enabled? true
mfg-mode off off
diag-level max min
#power-cycles 150
system-board-serial# 5015168052804
system-board-date 39a70946
fcode-debug? false false
More [<space>,<cr>,q,n,p,c] ?
output-device screen screen
input-device keyboard keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? true true
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk1:a disk net disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
More [<space>,<cr>,q,n,p,c] ?
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch? true false
{0} ok
--- Ende Code ---
hth
escimo:
--- Zitat von: Freud-Schiller am 07. Februar 2008, 15:16:24 ---Sun Ultra 80 UPA/PCI (4 X UltraSPARC-II 450MHz), No Keyboard
OpenBoot 3.23, 4096 MB memory installed, Serial #15730451.
Ethernet address 8:0:20:f0:7:13, Host ID: 80f00713.
--- Ende Zitat ---
Danke David. Ich vergleiche dann am Wochenende. Aber die OBP-Version wäre schon der erste Unterschied. Ich habe OpenBoot 3.31. :-\
Navigation
[0] Themen-Index
[#] Nächste Seite
[*] Vorherige Sete
Zur normalen Ansicht wechseln